Shopsmith's Pro Fence & Table System Upgrade is the best way to equip your MARK V 500 with the latest features and capabilities. Armed with this state-of-the-art fence and table system, you'll be able to tackle all of your projects with improved convenience, precision and safety.

Your upgrade includes a larger worktable and extension table with two floating support tables and a pair of telescoping support legs. Put it all together and you'll have over eight feet of table width for crosscutting even the longest boards!

The Pro Fence and Table System Upgrade Kit Includes:

• Larger Table with a 17-1/2" x 22" work surface. More support for ripping 4' x 8' plywood sheets and crosscutting even the longest boards.
• Pro Fence is 24-1/2" x 2-1/2" thick with a double T-slot track on the top surface with another T-slot on each side for attaching accessories, jigs and fixtures. Two levers lock it rigidly to the front and rear of the main or extension table with a quick flip. Includes a wider fence straddler.
• Wider Tie Bar with dual tilt locks at the front and rear of the table. The widened tube stance for dust collection and adds stability.
• New Table Carriage with quarter-turn locks. Hand wheel and lock move the table up and down, then secure it where you want it.
• Direct-Reading Rip Fence Scales let you read and instantly set the width of rip cuts up to 38-1/2" wide. Includes two interchangeable stainless steel scales that are graduated in both 1/16" and 1/32" increments.
• Two Floating Extension Tables slide on connecting tubes and lock any-where between the main table and the end extension table.
• Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.
• Two Telescoping Legs give added support in the middle or at the ends of the connecting tubes. A quick twist locks their height.
• See-Through Upper Saw Guard with depth-of-cut indicators, European-style riving knife and anti-kickback device.
• Lower Saw Guard, updated to accommodate Shopsmith's 12" Sanding Disc. Includes 2-1/2" diameter dust collection port.
• Two-position Lathe Tool Rest Arm with lever-style adjustment screws.
• Anti-rotation Tool Rest Post
• Saw Table Insert
• Steel Miter Gauge Bar with T-slot washer
• Larger Extension Table Top (vertical mounting tubes not included)
• 12" Steel Sanding Disc Hub (steel sanding discs sold separately)
• 1-1/4" diameter saw arbor
• All required fittings and hardware
• Instruction Manual
• Special Alignment Set-Up Gauge

Note: Due to the increased size of the Pro Fence System work table and how various accessories connect to it, some earlier MARK V 500 accessories may not fit the Pro Fence Upgrade. These include (but are not limited to) all table inserts, front table extension, rip fence, mortising hold-downs and some saw arbors.