Add a More Versatile Rip Fence for Improved Results and Direct-Reading Scales for Greater Accuracy!

The Pro Fence System Upgrade gives you everything you need to step your Mark V Model 505 up to the super-versatile complete workpiece Table Support System and Enhanced Rip Fence of the MARK 7 Pro Fence & Table System.

The professional-duty self-aligning, Pro Fence System features two interchangeable stainless-steel scales for direct-reading of rip cut widths, plus twin locking levers, first one for the infeed end of the fence and the second for the outfeed end to ensure a positive, precise fence lock-down, even when working with large and/or heavy workpieces. Your new Rip Fence drops straight down onto the fence rails without tipping or fiddling, then slides easily and precisely along the rails on high-tech glides.
Plus - the fence is easier to square-up than a 505 fence (the alignment screws are easily accessible on the top of the Rip Fence) and the additionally the two new new floating tables and two new Fixed Extension table Rails feature a 3-point locking system to ensure that your fence is always parallel to the blade, unlike the single-point locking system on the Model 505 fixed Extension table.

Add to everything above, TWO Complete Floating Extension Tables with Four 27" Connecting Tubes and two Telescoping Support Legs with Adjustable Fittings. These allow you to slide these Floating Tables anywhere between the Main Worktable and Fixed Extension Table OR EVEN outboard of either of these Tables.

Here's What You Will Get with the Pro Fence & Table Upgrade Kit:
• Larger Rip Fence is 24-1/2" Long x 2-1/2" Thick With Four T-Slot Tracks. Two on the Top Surface and a T-Slot Track on Each Side Face
• (2) New Direct-Reading Rip Fence Scales - Two Magnetic, Stainless Steel Scales, one 45" long and one 16" long
• New, Wider Fence Straddler made to Fit the New Wider Rip Fence
• (2) New Rails for Main Worktable with Magnetic Strips for the Stainless Steel Scales
• (2) New Rails for Extension Table with Magnetic Strips for the Stainless Steel Scales
• (2) New, Fully Assembled and Aligned Floating Extension Tables that Slide on Connecting Tubes and Lock Anywhere You Want Them
• Four 27" Connecting Tubes Slip Through the Rails and Tie the System Together With Locking Knobs
• Two Telescoping Legs Give Added Support - a Quick Twist Locks Their Height
• All Required Fittings and Hardware
• Instruction Manual
• (2) Special Set-Up and Alignment Gauges

Increase Your MARK s Outboard Support When Ripping Large Panels Or Cross-Cutting Long Boards by Adding 5-Foot Connector Tubes

Just slip these extra-long tubes into the rails of your MARK ’s (for All MARKs except MARK V 500 unless Upgraded) main table or extension table to get all the added support you need for sawing, drilling, sanding, shaping or performing virtually any operation with extra large or long workpieces. Your existing telescoping legs and floating extension tables also work with these tubes.

Note: Not compatible with Model 500 Mark Vs unless it has been Upgraded.