phone  (937) 890-5197

Shopsmith Forums

%nbsp;

30 posts 1 2 3

Recent adoptions - Joint-Matic and 10ER

#274100 by edma194 » Sun Sep 06, 2020 6:15 pm

Picked up 10ER Serial #E 58528. Haven't done anything with it yet, it has to wait until I have a 500 shortie and my left knee working. It's in decent condition and there's a speed changer available I plan pick up before too long. . Since there's no specific purpose for this machine this one can be the one I try to do one of those beautiful showroom quality restorations you guys have done.

10ER nameplate.jpg
10ER nameplate.jpg (325.01 KiB) Viewed 1845 times


Joint-Matic Serial #103190 is a real find. I've been needing a router table for a while and I really like the horizontal configuration. It came with the Bevel Miter Gauge, the Stop Rod kit, a couple of extra featherboard knobs, and a Rockwell router that's in good shape. Even the bit guard is in good shape (probably unused). There's no cracks in the slide but there is a little bit of side to side play so I'll have get the frame tightened up around it. I haven't had a router table set up for a while, last time was years ago and I already have some cedar slats tenoned for outer tables that I want to get finished up. I hope it works as well in use as it looks, with that bevel miter gauge and the jig that has plans in the manual I see a lot of potential to make joints I never would have attempted before.

Attachments

joint-matic1.jpg
joint-matic1.jpg (237.46 KiB) Viewed 1845 times
joint-matic2.jpg
joint-matic2.jpg (241.62 KiB) Viewed 1845 times

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274105 by JPG » Sun Sep 06, 2020 7:21 pm

Fix This before thee gets too frisky!
ClipboardXX.jpg
ClipboardXX.jpg (6.04 KiB) Viewed 1837 times

---

╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274116 by edma194 » Sun Sep 06, 2020 9:46 pm

It's solid there. The lock mechanism and the adjuster nut are fine. There's discoloration of the plastic that might come clean, but nothing eaten away. I checked that before purchase based on other threads about the machine.

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274204 by chapmanruss » Tue Sep 08, 2020 1:23 pm

I look forward to more posts on your Model 10ER as you are able to work on it. At some point I may ask, when you are able, to provide more information about parts to compare with what I know about other Model 10's. In the mean time enjoy your new finds.

---

Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters. Has Speed Changer, Model 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. On bench w/ metal ends & retractable casters.

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274221 by edma194 » Tue Sep 08, 2020 4:17 pm

chapmanruss wrote:I look forward to more posts on your Model 10ER as you are able to work on it. At some point I may ask, when you are able, to provide more information about parts to compare with what I know about other Model 10's. In the mean time enjoy your new finds.


I had to get on my feet and do something today so I took a trip down to the basement to take a quick photo inventory. I'm not a great photographer but you can see what I have below and feel free to ask me about specific parts. I'll take better photos of anything you are interested in. There's a list of options by serial number somewhere that I confirmed a couple of the features from, I'll get it down with more detail eventally.

I see I didn't get much of a shot of the belt cover and tailstock but they are there and intact.

Attachments

10ER headstock LR.jpg
10ER headstock LR.jpg (364.07 KiB) Viewed 1765 times
10ER motor plate LR.jpg
10ER motor plate LR.jpg (332.1 KiB) Viewed 1765 times
10ER table and fence LR.jpg
10ER table and fence LR.jpg (206.19 KiB) Viewed 1765 times
10ER extension table LR.jpg
10ER extension table LR.jpg (80.58 KiB) Viewed 1765 times
10ER accessory 1 LR.jpg
10ER accessory 1 LR.jpg (244.55 KiB) Viewed 1765 times
10ER accessory 2 LR.jpg
10ER accessory 2 LR.jpg (234.02 KiB) Viewed 1765 times
10ER accessory 3 LR.jpg
10ER accessory 3 LR.jpg (282.07 KiB) Viewed 1765 times

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274233 by JPG » Tue Sep 08, 2020 7:49 pm

FYI https://www.ebay.com/itm/Shopsmith-10E- ... SwIHVfUt~t

?? Why ya keep hiding the tail stock??? :D

---

╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274237 by edma194 » Tue Sep 08, 2020 8:47 pm



My plan was to ruin that one by welding it back together before I buy a replacement.

?? Why ya keep hiding the tail stock??? :D


I think it's just camera shy.

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274262 by chapmanruss » Wed Sep 09, 2020 1:57 pm

Interesting, a broken tailstock. I can't even imagine how someone would break one. Was it the third or fourth version? See the pictures of the versions below.

Tailstock C2342 V3 view 2 r.jpg
Version 3
Tailstock C2342 V3 view 2 r.jpg (133.34 KiB) Viewed 1690 times

Tailstock D2342 V4 r.jpg
Version 4 - last version
Tailstock D2342 V4 r.jpg (245.7 KiB) Viewed 1690 times
One item I did notice is the Blade Guard being the later version. In the picture below the bottom one is that late version.

Saw Guards with Splitters r.jpg
Saw Guards with Splitters r.jpg (151.14 KiB) Viewed 1690 times
I look forward to more comparisons. A couple of questions, does the fence have the block on the end of the lock knob or just the threaded end? Is there a hole in the headstock behind the Logo/Serial Number Plate?

---

Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters. Has Speed Changer, Model 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. On bench w/ metal ends & retractable casters.

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274264 by edma194 » Wed Sep 09, 2020 2:23 pm

chapmanruss wrote:Interesting, a broken tailstock. I can't even imagine how someone would break one. Was it the third or fourth version? See the pictures of the versions below.


You misunderstood, the tailstock is fine, just that crankarm in the picture with the saw blade is broken. I just never pulled up the tailstock for a good photo. I can't imagine breaking that thing either. I love how sturdy this guy is.

I look forward to more comparisons. A couple of questions, does the fence have the block on the end of the lock knob or just the threaded end? Is there a hole in the headstock behind the Logo/Serial Number Plate?


I'll look for these things and grab photos for you. Do you mean an access hole covered by the plate like regular headstocks?

Post a reply  Reply with quote 

Re: Recent adoptions - Joint-Matic and 10ER

#274269 by JPG » Wed Sep 09, 2020 7:08 pm

IIUC the hole is there to allow access to the area behind the power switch thus giving good access to the switch.

---

╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply  Reply with quote 

Who is online

Users browsing this forum: No registered users and 113 guests

Board indexDelete all board cookies

Welcome to Shopsmith. Please fill in this form and we'll send you more information and special offers for the Shopsmith MARK 7 and other woodworking topics.

Subscribe to our mailing list

* indicates required