They should work now.cadman57 wrote:Why are a number of the links not able to be shown .............. something about "Religion" problem and showing the information is halted ???
This has to be an incorrect situation ............. is it because some of the titles say "Reborn .........."
How crazy is this ???
dave
Everything Mark 5 / V - Technical info, documentation, links
Moderators: HopefulSSer, admin
Re: Everything Mark 5 / V - Technical info, documentation, l
Re: how hard should it be to turn the thickness planer adjustment
onevw wrote:I got this thickness planer with the cast alum round handle used to adjust the plate. It is hard to turn, I lubed the lead screws with bo-shield a light lubricant usually used for Alum. But is still very hard the turn handle. Not sure how hard this should be. And help will be appreciated.
Thanks RICK
======================
It is probably dust..
I am no expert ,,,,so allow me to just ask a question,,,, when the table moves up and down ,,,,,it slides in a track on the ends,,, could they be full of dust ,,or even rust?
my dad has a planer that adjust the table with a chain when ya turn the crank handle, constant cleaning is a good thing.
good luck
Hobbyman2
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- JPG
- Platinum Member
- Posts: 34651
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Everything Mark 5 / V - Technical info, documentation, links
It should turn quite easily.
I would be suspicious of the elevator(jack screws) sprockets being out of sync with each other. Have you checked the side to side/front to rear alignment to the cross bars?
I would be suspicious of the elevator(jack screws) sprockets being out of sync with each other. Have you checked the side to side/front to rear alignment to the cross bars?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
- Bronze Member
- Posts: 1
- Joined: Wed Mar 29, 2017 4:53 pm
Re: Everything Mark 5 / V - Technical info, documentation, links
Good afternoon JPG,
I picked up a shopsmith at the town dump recently. Needed to reverse engineer the power plant lock to get it from moving down the rails. Question, just bought some sanding parts from Shopsmith and a instruction manual but none of the Mark V model 500 or Mark V model 510 pats match my machine.
The red disc has Model ER serial no. ER35189. wish to find a shop manual to learn about the RPM speeds and set ups.
Thank you
Hartley
I picked up a shopsmith at the town dump recently. Needed to reverse engineer the power plant lock to get it from moving down the rails. Question, just bought some sanding parts from Shopsmith and a instruction manual but none of the Mark V model 500 or Mark V model 510 pats match my machine.
The red disc has Model ER serial no. ER35189. wish to find a shop manual to learn about the RPM speeds and set ups.
Thank you
Hartley
- JPG
- Platinum Member
- Posts: 34651
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Everything Mark 5 / V - Technical info, documentation, links
Your turn Everett.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- everettdavis
- Platinum Member
- Posts: 2162
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Everything Mark 5 / V - Technical info, documentation, links
Sorry JPG,
I have been out of the loop on this one.
I would advise them to follow the link at https://www.shopsmith.com/ss_forum/view ... 90#p185690
Find the My Google Drive link just after the first four PDF's and find the Fully Restored 10E and 10ER manuals under the 10E& 10ER folders. You can download them and find a good bit of other information on the 10E and 10ER's.
I have been out of the loop on this one.
I would advise them to follow the link at https://www.shopsmith.com/ss_forum/view ... 90#p185690
Find the My Google Drive link just after the first four PDF's and find the Fully Restored 10E and 10ER manuals under the 10E& 10ER folders. You can download them and find a good bit of other information on the 10E and 10ER's.
Re: Everything Mark 5 / V - Technical info, documentation, links
SPAM coming!
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- everettdavis
- Platinum Member
- Posts: 2162
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Everything Mark 5 / V - Technical info, documentation, links
I imagine an admin has removed some intervening post.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: Everything Mark 5 / V - Technical info, documentation, links
Yes admin/moderator removed the posts.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT