Speed changer rpms
Moderators: HopefulSSer, admin
-
- Gold Member
- Posts: 28
- Joined: Sat Nov 19, 2022 2:36 pm
Speed changer rpms
I was wondering if there is a conversion chart somewhere.....whether I'm in the HIGH-speed range or the LOW-speed range with my speed changer, that would give me relative(close) rpms to the numbers on my speed changer? I do have a nice chart that came with the machine that tells me what rpms are suitable for the various tasks the SS is capable of doing. My speed changer numbers go from 1-5. (10ER)
Kevin
Kevin
Re: Speed changer rpms
Here ya go…
Re: Speed changer rpms
Or this one….
Re: Speed changer rpms
Or maybe this one too….
- JPG
- Platinum Member
- Posts: 34644
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Speed changer rpms
When it rains it pours!
A PDF of that last one would be nice!!!
A PDF of that last one would be nice!!!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
- Gold Member
- Posts: 28
- Joined: Sat Nov 19, 2022 2:36 pm
Re: Speed changer rpms
Thank you, guys! Agreed, a PDF of that last chart would be fantastic!
Kevin
Kevin
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Speed changer rpms
I also agree it would be nice to have a PDF copy of the last chart. I have not seen that one before which appears to have come out after the Model 10ER was discontinued. Note it says Magna Power Tool Corporation not Magna Engineering Corporation. Below is a PDF replica of the Speed Chart DarrenDD posted in his second post. I printed mine on heavy stock paper and keep it with my Model 10ER for reference.
_ .
As it says actual speeds are only approximate.
_ .
As it says actual speeds are only approximate.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
- Gold Member
- Posts: 28
- Joined: Sat Nov 19, 2022 2:36 pm
Re: Speed changer rpms
I think I found my salvation! Buried in a box of SS stuff.....a thick paper dial that you rotate for 'Hard metals, plastics, soft metals, and wood. It's for the single belt AND the speed changer; both high and low. Took me a few minutes to figure it out, but it not only gives one rpms, but what numbers correlate on the speed changer. Perfect. I'm going to wet it then let it air dry between glass...it's pretty warped.
Kevin
Kevin
-
- Platinum Member
- Posts: 625
- Joined: Sun Nov 30, 2014 8:51 am
- Location: Midway between Houston/Galveston, TX
Re: Speed changer rpms
Not the highest quality, but I was able to skew the image fairly quickly using Photoshop to make it more readable. I may play with it some more to improve/replace the blurry text at the top of the chart. Not an Everett Davis quality restoration by any means, but better. A PDF and a JPG version:
- Attachments
-
Woodworking Operations Chart For Shopsmith 10ER 300 dpi.pdf
- (833.56 KiB) Downloaded 24 times
-
- Woodworking Operations Chart For Shopsmith 10ER 300 dpi.jpg (193.82 KiB) Viewed 3624 times