Page 1 of 1
Plant Stand Another honey-do project
Posted: Sat Apr 08, 2023 3:45 pm
by STB
It seems when one honey-do project is completed two more appear in its place.
- 20230408_111705.jpg (409.44 KiB) Viewed 6550 times
- 20230408_111224.jpg (405.45 KiB) Viewed 6550 times
Cutting veneer for decorative edge.
- 20230408_112237.jpg (385.65 KiB) Viewed 6550 times
Re: Plant Stand Another honey-do project
Posted: Sun Apr 09, 2023 9:06 am
by Hobbyman2
Nice job!!
Re: Plant Stand Another honey-do project
Posted: Sun Apr 09, 2023 4:15 pm
by larryhrockisland
Like!
Re: Plant Stand Another honey-do project
Posted: Mon Apr 10, 2023 8:16 pm
by Matanuska
Very nice. How did you construct the skirt?
Re: Plant Stand Another honey-do project
Posted: Tue Apr 11, 2023 12:42 pm
by edflorence
Matanuska wrote: ↑Mon Apr 10, 2023 8:16 pm
Very nice. How did you construct the skirt?
I second that question...and also would be interested in hearing how you built the lip around the top. BTW, great project!
Re: Plant Stand Another honey-do project
Posted: Tue Apr 11, 2023 7:06 pm
by STB
edflorence wrote: ↑Tue Apr 11, 2023 12:42 pm
Matanuska wrote: ↑Mon Apr 10, 2023 8:16 pm
Very nice. How did you construct the skirt?
I second that question...and also would be interested in hearing how you built the lip around the top. BTW, great project!
The skirt was constructed by gluing two 3/4 plywood sheets and using the ss band saw circle jig to cut the skirt base then gluing on a veneer strip.
The top is a solid piece of 4 quarter Butternut that was holowed using a SS over arm router.the outside edge was formed using a SS shaper and the inside of the lip was hand formed using various hand tools rasp, gouge ect. note Butternut is easy to carve/shape by hand.
- 20230411_151008.jpg (368.45 KiB) Viewed 6401 times
- 20230411_151108.jpg (188.42 KiB) Viewed 6401 times