Page 1 of 1
Help.
Posted: Tue Nov 05, 2019 10:36 pm
by Bird72
- 1E2C8B29-E415-4CAC-9111-06FF385D225C.jpeg (34.9 KiB) Viewed 6542 times
- 1E2C8B29-E415-4CAC-9111-06FF385D225C.jpeg (34.9 KiB) Viewed 6542 times
Does anyone have any idea what this might be? It’s supposed to be Shopsmith.
Thank you
Re: Help.
Posted: Wed Nov 06, 2019 1:01 am
by rpd
It is a Universal Table Saw Jig,
https://woodworker.com/universal-table- ... -30254.asp
The Shopsmith Tenon Master Jig is similar but will have the narrower miter bar to fit the slot in the Mark V tables, and the clamping system is different.
http://www.lhdigest.com/SS/MANUALS/OTHE ... 555089.pdf
I have an older version of the Craftsman Universal Jig that works on my 10ER, which has a 3/4" miter slot.
Also check out this thread.
https://www.shopsmith.com/ss_forum/comm ... 19565.html
Re: Help.
Posted: Wed Nov 06, 2019 11:51 am
by Bird72
THANK YOU.