Quick clamp on miter guge
Moderators: HopefulSSer, admin
Quick clamp on miter guge
I have a 510 and having difficulty with the quick clamp on the miter gauge slipping when I set the clamp and squeeze on the miter gauge to hold the wood. It continues slip. Has anyone had this problem and how is it repaired. thanks larry
Re: Quick clamp on miter guge
Set the clamp tighter? Seriously, what is the problem? Pictures help. There is no reason the wood should slip.lalkie wrote:I have a 510 and having difficulty with the quick clamp on the miter gauge slipping when I set the clamp and squeeze on the miter gauge to hold the wood. It continues slip. Has anyone had this problem and how is it repaired. thanks larry
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Quick clamp on miter guge
Check the assembly of your miter gauge against the owner's manual. There should be a set screw on top of the hold down that secures the safety clamp to the miter gauge handle. Make sure that the screw is tight. If loose it will permit the clamp to rise as you grip the handle and causing a loose grip.
Bill V
Bill V
- dusty
- Platinum Member
- Posts: 21371
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Quick clamp on miter guge
Is this what you have?
- Attachments
-
- Capture Safety Grip.PNG (100.1 KiB) Viewed 784 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.