Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Thu Apr 11, 2019 12:22 pm
I bet you could get a good deal on that Gryphon, Q. After all, you're nearly done with the Roamer, and will be needing something to do! 
Shopsmith Forums
A woodworking forum for woodworking hobbyist and woodworking projects related and unrelated to the Shopsmith MARK V
https://forum.shopsmith.com/
Using a Shop Smith Mark V on a Chris Craft Roamer refit
Page 58 of 88
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Fri Apr 12, 2019 5:33 pm
BuckeyeDennis, you join a long and growing list of other people who've been keeping track of my refit and made that same observation. LOL
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Sat Apr 13, 2019 10:18 am
'Somebody'(in the comments) did not observe the screens are mounted horizontal.
BTW is not your wordpress url no longer accurate?
BTW is not your wordpress url no longer accurate?
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Sat Apr 13, 2019 6:21 pm
Hi JPG. I squared him away on those screens. ;-)
Right, I'm no longer hosted on Wordpress. The popup ads, which only benefited WP, were obnoxious, and there were some other features there that I didn't like. So a few months back I announced I was moving the blog and would be self-hosting. I'm no longer updating the WP blog and will eventually deactivate it, once search engines preferentially find the new blog.
Right, I'm no longer hosted on Wordpress. The popup ads, which only benefited WP, were obnoxious, and there were some other features there that I didn't like. So a few months back I announced I was moving the blog and would be self-hosting. I'm no longer updating the WP blog and will eventually deactivate it, once search engines preferentially find the new blog.
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Sat Apr 13, 2019 8:11 pm
So, how about changing the web site url in yours posts here.roamer46 wrote:Hi JPG. I squared him away on those screens. ;-)
Right, I'm no longer hosted on Wordpress. The popup ads, which only benefited WP, were obnoxious, and there were some other features there that I didn't like. So a few months back I announced I was moving the blog and would be self-hosting. I'm no longer updating the WP blog and will eventually deactivate it, once search engines preferentially find the new blog.
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Sun Apr 14, 2019 7:07 am
Since changing hosts, I've only linked to the new site.
You don't mean the old posts do you??? LOL
You don't mean the old posts do you??? LOL
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Wed Apr 17, 2019 12:21 am
I was referring to the "website" in the upper right corner.
- temp.jpg (20.09 KiB) Viewed 24492 times
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Wed Apr 17, 2019 6:04 am
What forum “skin” are you using, Red? On ProSilver, I don’t see Roamer46’s website URL even when I view his profile page.JPG wrote:I was referring to the "website" in the upper right corner.
temp.jpg
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Wed Apr 17, 2019 7:39 am
I got my Commander 42 splashed after applying three coats of bottom paint and I had a bit of time to burn one afternoon. So I broke out the fine sandpaper and buffing compounds and went to work on one of the stainless stanchion pipes I welded up two+ years ago. It's amazing how nice it looks. Comparing the finished pipe to the mill finish...you wouldn't think they were the same pipe!
1969 Chris Craft Roamer 46 Refit: Polishing Stainless Safety Rail Stanchions
Cheers,
Q
Before
After
1969 Chris Craft Roamer 46 Refit: Polishing Stainless Safety Rail Stanchions
Cheers,
Q
Before
After
Re: Using a Shop Smith Mark V on a Chris Craft Roamer refit
Posted: Wed Apr 17, 2019 7:42 am
Gotcha. Fixed. ThxJPG wrote:I was referring to the "website" in the upper right corner.