SAWSMITH 2000 - I HAVE 3D PRINTED UNAVAILABLE PARTS
Moderators: HopefulSSer, admin
SAWSMITH 2000 - I HAVE 3D PRINTED UNAVAILABLE PARTS
For anyone who owns a SAWSMITH 2000, you know spare/replacement parts are hard to get. I have a standard MODEL (555530) I've owned for over 20 years (and I got it from my father-in-law when he closed up his cabinet shop.)
Anyway, I happen to do 3D CAD design as a business, so recreating some of the hard to find parts and then printing them in ABS plastic on my 3D printer has been very useful.
I thought I'd share some of the parts I have currently replaced so that if any of you SAWSMITH owners need a resource, I might be of help.
So far, the 3 parts I've re-engineered and replaced are the:
Carriage pull rod Collet Plate PN 516459
Carriage pull rod Locking Collet PN 516457
and
a sub-component of the Carriage Pull rod, the little vibration dampening connector with two 1/4"-20 threaded ends that are molded into rubber. On this part, I have removed the two threaded pieces and created a 3D ABS plastic retrofit kit that allows the connector to join the carriage pull rod to the carriage, while providing flexibility like the rubber piece does.
I have had the parts on my SAWSMITH for a few weeks now and so far all is working fine. If you are interested, send me a note.
I've attached some pictures of the 3 parts.
If you have another part that you can't get replaced, I may be able to help out.
I have a business website (for my 3D design business) https://www.chadwallsvcs.com and you can use the contact page there should I not see any messages here.
Best Regards,
Chad M. Wall
Last edited by ChadmWall on Thu Jan 14, 2021 7:11 pm, edited 3 times in total.
Re: SAWSMITH 2000 - I HAVE 3D PRINTED UNAVAILABLE PARTS
Here are some more images of the parts I designed and 3D printed.
Last edited by ChadmWall on Tue Aug 23, 2022 6:49 pm, edited 1 time in total.
Re: SAWSMITH 2000 - I HAVE 3D PRINTED UNAVAILABLE PARTS
This is phenomenal. I'm PM'ing you for details. Have you done anything regarding the locking hubs #516458?
I picked up an Ultra a week ago and am very excited. Not knowing what to look for as I had never seen one, I got home to find that the threaded part of the carriage lock is broken and was missing one of the locking hubs. I have been racking my brain on ways to rig it, but this solves the issue!
I picked up an Ultra a week ago and am very excited. Not knowing what to look for as I had never seen one, I got home to find that the threaded part of the carriage lock is broken and was missing one of the locking hubs. I have been racking my brain on ways to rig it, but this solves the issue!
Shopsmith Power Pro Mark 7, Sawsmith 2000, Planer, Bandsaw, Belt Sander, Strip Sander, Jig Saw, Biscuit Joiner, Joint-Matic, Jointer, Mortise, Molder, Maxi Clamp, Scroll Saw, Shaper, Router, DC3300, Smithy Super Shop, Craftsman RAS & Bandsaw
- friscomike
- Gold Member
- Posts: 157
- Joined: Wed Oct 31, 2007 11:49 am
- Location: Granbury, Texas