Disassembly?

Moderators: HopefulSSer, admin

edma194
Platinum Member
Posts: 1875
Joined: Fri Jun 19, 2020 4:08 pm

Re: Disassembly?

Post by edma194 »

Definitely a good deal.

For moving, I remove the table and all accessories. With the headstock at one end I remove the legs from the other end and put that side up into the vehicle on a small piece of cardboard. Then slide the headstock to that end now inside the vehicle, slide it in up to the other legs and remove those. Just keep the headstock all the way at one end so you don't stress the way tubes.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
User avatar
chapmanruss
Platinum Member
Posts: 3449
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Disassembly?

Post by chapmanruss »

Even if it needs some TLC that was a great deal.
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
djeung
Bronze Member
Posts: 3
Joined: Sun Sep 13, 2020 10:19 am

Re: Disassembly?

Post by djeung »

Whew! That's what I told my wife as justification for getting it. :D
User avatar
JPG
Platinum Member
Posts: 34610
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Disassembly?

Post by JPG »

To refer to that as a 'great' deal does not do it justice! :cool: :cool: :cool:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
edma194
Platinum Member
Posts: 1875
Joined: Fri Jun 19, 2020 4:08 pm

Re: Disassembly?

Post by edma194 »

As a comparison, here's a deal that's not as good for a 510+bandsaw+router package for $750 up here in New England: https://boston.craigslist.org/nos/tls/d ... 51333.html

Maybe he'd bring the price down a little on that one, but there's no belt sander, jointer, and dust collector. And that's still a pretty good price for a 510.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
User avatar
db5
Platinum Member
Posts: 1181
Joined: Mon Jun 06, 2011 6:20 pm
Location: Oklahoma City

Re: Disassembly?

Post by db5 »

stew wrote:IMO that was a great deal!
Not a "great deal" but a "really great deal!"
crunchief
Bronze Member
Posts: 6
Joined: Thu Sep 24, 2020 4:07 pm

Re: Disassembly?

Post by crunchief »

Pull the pivot pin. 2 people to load.
A simple jig to support the way tubes and realign.
"Maxine" heading home yesterday. There were a LOT more blankets added than pictured
Attachments
resized2.JPG
resized2.JPG (1.62 MiB) Viewed 2074 times
resized3.JPG
resized3.JPG (426.44 KiB) Viewed 2074 times
Post Reply