Shopsmith hacks
Moderators: HopefulSSer, admin
Shopsmith hacks
One of the things I really love about this forum is the collective creativity of its members. As I was reading a magazine of jigs and fixtures, I thought maybe it might be a fine time to devote a thread to the many adaptations people have made to their Shopsmiths in order to make woodworking easier. Sometimes these threads have shown up in other categories, however I thought having a thread devoted to these jigs and fixtures specifically would make them easier to find.
BPR
BPR
Re: Shopsmith hacks
Great idea. The only thing I've done to my MKVs was to add the Jointech Saw Train and router table to one of them. It has been a very nice addition. I did remove the upper and lower blade guards from both of my saws. For the shorty, I made a drill press table. On the list, though, is Shipwright's drum sander. Maybe, some day.
- Ed in Tampa
- Platinum Member
- Posts: 5826
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
Re: Shopsmith hacks
Gene Howe wrote:Great idea. The only thing I've done to my MKVs was to add the Jointech Saw Train and router table to one of them. It has been a very nice addition. I did remove the upper and lower blade guards from both of my saws. For the shorty, I made a drill press table. On the list, though, is Shipwright's drum sander. Maybe, some day.
Upper and lower saw blade guards? Why would you remove both? I know many people can not deal with the upper Guard but why on earth remove the lower one? What is your thinking on this?
Re: Shopsmith hacks
I pretty much make no changes from factory configuraton. I did purchase some longer connecting tubes to make the table larger for breaking down 4x8 sheets of plywood, but I can't really call it a hack because Shopsmith offers longer tubes for those of us who use them.
Re: Shopsmith hacks
Well, no deep thinking involved. I just didn't find it necessary.Ed in Tampa wrote:Gene Howe wrote:Great idea. The only thing I've done to my MKVs was to add the Jointech Saw Train and router table to one of them. It has been a very nice addition. I did remove the upper and lower blade guards from both of my saws. For the shorty, I made a drill press table. On the list, though, is Shipwright's drum sander. Maybe, some day.
Upper and lower saw blade guards? Why would you remove both? I know many people can not deal with the upper Guard but why on earth remove the lower one? What is your thinking on this?
- dusty
- Platinum Member
- Posts: 21359
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Shopsmith hacks
Now that I am in my "golden years" I find that I'm accident prone. Therefore, I try not to deliberately expose anything sharp. Doing away with the lower saw guard just scares me. I do, however, work nearly all of the time without the upper saw guard which I consider a nuisance.
The only time I have experienced bodily injury by the saw blade - the saw was not even turned on.
The only time I have experienced bodily injury by the saw blade - the saw was not even turned on.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 34610
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Shopsmith hacks
Since my goldie has NEVER had either guard, I have not needed to remove them. However since I have never had them I am ALWAYS conscous of their absence. So as I get older I do concentrate more on that fact and do always keep track of me and the blade. Yes as I get older that is a necessity.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Shopsmith hacks
The hack I use every time I use my 10ER is the Allen key/lamp holder.
Second would be the fairly recent addition of drawers under the bench.
Second would be the fairly recent addition of drawers under the bench.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
- edflorence
- Platinum Member
- Posts: 621
- Joined: Thu Jul 20, 2006 8:14 pm
- Location: Idaho Panhandle
Re: Shopsmith hacks
Classic looking setup! Really like the drawers as well as the lamp/hex key rack.
Ed
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Re: Shopsmith hacks
Here I have my Shopsmith set up to mix drywall texture compound.