I recently acquired the above mentioned chuck. Unfortunately the spindle is only about 1/2". Does anyone have any suggestions on how to modify it to be used on a Shopsmith?
Thanks in advance for any suggestions.
Wood River 1 3/8" Expanding Collet Chuck MT1
Moderators: HopefulSSer, admin
Re: Wood River 1 3/8" Expanding Collet Chuck MT1
Do you have a link to the product?
1986 510, jointer, bandsaw, belt sander, scroll saw, jigsaw and lots of accessories. Shopsmith woodworking bench too!
Re: Wood River 1 3/8" Expanding Collet Chuck MT1
It looks like WoodRiver has discontinued that model.. I found this through Google, but it is showing it with a 3/4-16 internal thread for mountingLodgepole wrote:I recently acquired the above mentioned chuck. Unfortunately the spindle is only about 1/2". Does anyone have any suggestions on how to modify it to be used on a Shopsmith?
Thanks in advance for any suggestions.
https://www.woodcraft.com/products/expa ... 4-x-16-tpi
And this one on PSI with 1-8 female thread. https://www.pennstateind.com/store/CXC4.html
Is it possible that the #1MT shaft threads into the chuck body and is removable? If so, what is the size/TPI, there may be an adapter available to mount on the SS 5/8 spindle.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: Wood River 1 3/8" Expanding Collet Chuck MT1
Thanks for the suggestion. Tomorrow, if it stops snowing, I'll try to take it apart. Again, thanks for both of your quick responses.
Re: Wood River 1 3/8" Expanding Collet Chuck MT1
I found a "Lathe Spindle Adapter Fits Shopsmith Mark V 5/8" Spindle to 3/4" x 16 TPI Thread Chuck" for $42.50.
1986 510, jointer, bandsaw, belt sander, scroll saw, jigsaw and lots of accessories. Shopsmith woodworking bench too!
Re: Wood River 1 3/8" Expanding Collet Chuck MT1
With the Shopsmith 1/2" router chuck, you could use the Beall expanding collets, unfortunately, they skip the 1 3/8" size.
http://www.bealltool.com/products/turni ... ollets.php
Mike
http://www.bealltool.com/products/turni ... ollets.php
Mike
Re: Wood River 1 3/8" Expanding Collet Chuck MT1
Thanks for the additional ideas!