Adirondack plans

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderators: HopefulSSer, admin

Post Reply
dafixer
Gold Member
Posts: 62
Joined: Sat Jul 18, 2015 9:03 am

Adirondack plans

Post by dafixer »

Shopsmith used to carry plans for a 4 piece set...Adirondack Quartet chairs, table and foot stool. The product number was 521694 but, they've discontinued selling it.

Does anyone have those plans that I could get from you?

Thanks a lot!

Frank Albert
User avatar
cincinnati
Platinum Member
Posts: 1172
Joined: Sun Apr 15, 2007 6:40 pm
Location: Cincinnati, Ohio

Re: Adirondack plans

Post by cincinnati »

Not sure exactly what you are looking for but Rockler offers this.
https://www.rockler.com/adirondack-chai ... ware-packs
dafixer
Gold Member
Posts: 62
Joined: Sat Jul 18, 2015 9:03 am

Re: Adirondack plans

Post by dafixer »

The plans were for these pieces as shown with the product number 521694.
The pieces are shown in the attached jpeg.
Attachments
adirondack_quartet[1].jpg
adirondack_quartet[1].jpg (78.42 KiB) Viewed 19355 times
thunderbirdbat
Platinum Member
Posts: 786
Joined: Sat Aug 08, 2015 11:23 am
Location: Marion, Iowa

Re: Adirondack plans

Post by thunderbirdbat »

Did a search for adirondack quartet plans and quite a few results showed up. Here is one.
https://www.amazon.com/U-Bild-C64-Adiro ... B0048DKUBE
Brenda

1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
dafixer
Gold Member
Posts: 62
Joined: Sat Jul 18, 2015 9:03 am

Re: Adirondack plans

Post by dafixer »

Thanks a lot!
SS doesn't carry the plans anymore so, my guess is they sold them off to someone else and viola!...you found them!
Again, thanks alot!
jmattsson
Gold Member
Posts: 21
Joined: Wed Apr 20, 2016 2:06 pm

Re: Adirondack plans

Post by jmattsson »

The best Adirondack chair plans I have found are from Rockler. Full-sized templates which do not require any complicated angle cuts.
dafixer
Gold Member
Posts: 62
Joined: Sat Jul 18, 2015 9:03 am

Re: Adirondack plans

Post by dafixer »

Thanks, I'll check them out. I've kinda changed my mind about the build of the chair. I'm thinking of some patio table-height chairs with a small shelf between them at foot level and arm level.
Post Reply