Cant believe my '81 model mark 5 still runs like a dream
Moderators: HopefulSSer, admin
Cant believe my '81 model mark 5 still runs like a dream
Hello everyone. I'm new to the forum as far as posting. I have read a lot of good information on here and I thank you folks for that.
I have a '81 (according to the serial number) Mark 5 that I bought several years ago from a Fireman who was building a house with it. When he finished he sold it to me. I later sold it to a co-worker to build a house on his farm and when he was finished I bought it back.
The serial # is 111589 which according to the chart is an 81 model, however mine has the 510 package and also the the two bearing quill. I cant believe the fireman had it upgraded so i'm wondering about that serial number if it's correct or not.
Again Thanks for all the great information.
I have a '81 (according to the serial number) Mark 5 that I bought several years ago from a Fireman who was building a house with it. When he finished he sold it to me. I later sold it to a co-worker to build a house on his farm and when he was finished I bought it back.
The serial # is 111589 which according to the chart is an 81 model, however mine has the 510 package and also the the two bearing quill. I cant believe the fireman had it upgraded so i'm wondering about that serial number if it's correct or not.
Again Thanks for all the great information.
- JPG
- Platinum Member
- Posts: 34632
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Cant believe my '81 model mark 5 still runs like a dream
I think you have a Mark V 510 manufactured on Nov 15, 1989.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Cant believe my '81 model mark 5 still runs like a dream
Thank you for the reply. That makes more sense to me
- chapmanruss
- Platinum Member
- Posts: 3479
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Cant believe my '81 model mark 5 still runs like a dream
If the Serial Number is SS-111589 than it would have been made in December 1981 and later upgraded to a Mark V 510. If it does not have the SS prefix in the Serial Number than it is a Date Code and JPG is correct. Either way it is a Mark V since the Mark 5 labeling on the machine was changed to Mark V between January and March 1980. Also the Date Code/Serial Numbers are printed on a sticker whereas the Serial Numbers are stamped on the lower edge of the Belt Cover Vent Plate.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
- everettdavis
- Platinum Member
- Posts: 2162
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Cant believe my '81 model mark 5 still runs like a dream
If you get a second to snap a photo and size it down to fit in the forums, please take one of the serial number and we will know for sure.
From your description it sounded like there was an upgrade to the 510 by the buyer you sold it to, as your comment suggests you noticed the differences when you bought it back.
You would not have mentioned it otherwise I suspect.
Everett
From your description it sounded like there was an upgrade to the 510 by the buyer you sold it to, as your comment suggests you noticed the differences when you bought it back.
You would not have mentioned it otherwise I suspect.
Everett
Re: Cant believe my '81 model mark 5 still runs like a dream
Couple of Pictures. I love a good mystery!
- Attachments
-
- 20190522_095032.jpg (167.88 KiB) Viewed 20486 times
-
- 20190522_095306.jpg (143.3 KiB) Viewed 20486 times
- chapmanruss
- Platinum Member
- Posts: 3479
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Cant believe my '81 model mark 5 still runs like a dream
Mystery solved!
It is a Mark V 510 made November 15, 1989
Keep it running like a Dream by following the Headstock lubrication as listed in the Maintenance section of the Manual. Also follow the waxing recommendations. This will keep it running and looking like new for years to come.
It is a Mark V 510 made November 15, 1989
Keep it running like a Dream by following the Headstock lubrication as listed in the Maintenance section of the Manual. Also follow the waxing recommendations. This will keep it running and looking like new for years to come.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Cant believe my '81 model mark 5 still runs like a dream
Thank you Russ,
This old gal has build a portion of at least three houses. I give it a pretty good workout almost every days sill. I have the big can of JPW and use it constantly. I'm really happy to have it back home. I saw my first SS demonstration in the middle of the mall in North Little Rock, Arkansas about a week before I was drafted into the U.S. Army in 1972. Couldn't wait to get out so I could get home and get one. Never could afford a brand new one and still cant but i'm way happy with this one over the years
This old gal has build a portion of at least three houses. I give it a pretty good workout almost every days sill. I have the big can of JPW and use it constantly. I'm really happy to have it back home. I saw my first SS demonstration in the middle of the mall in North Little Rock, Arkansas about a week before I was drafted into the U.S. Army in 1972. Couldn't wait to get out so I could get home and get one. Never could afford a brand new one and still cant but i'm way happy with this one over the years
- everettdavis
- Platinum Member
- Posts: 2162
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Cant believe my '81 model mark 5 still runs like a dream
I am curious now. It was a 510 when you sold it to the fireman? What did he upgrade on it?
Everett
Everett
- JPG
- Platinum Member
- Posts: 34632
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Cant believe my '81 model mark 5 still runs like a dream
We have determined that it was a 1989 Mark V 510 when born, so no upgrade ocurred.everettdavis wrote:I am curious now. It was a 510 when you sold it to the fireman? What did he upgrade on it?
Everett
Also he purchased it from the fireman.
![Wink ;)](./images/smilies/wink.gif)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange