spiral blades ,intarsia and the ss jig saw
Moderators: HopefulSSer, admin
spiral blades ,intarsia and the ss jig saw
any one have a favorite brand spiral cut blade for the jig saw?
Or pro/con advise on them
gearing up for a little intarsia ,could use some advise .
Should I spring for another saw?
not sure I want to stand up the entire time I am working ?
Than again bending over setting down may be worse then standing ?
Or pro/con advise on them
gearing up for a little intarsia ,could use some advise .
Should I spring for another saw?
not sure I want to stand up the entire time I am working ?
Than again bending over setting down may be worse then standing ?
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: spiral blades ,intarsia and the ss jig saw
My wife uses Flying Dutchman blades and loves them.
IMO there is nothing wrong with the SS scroll saw. Which saw do you have? We have the stand alone Teal saw. My wife sits for hours on a stool cutting. You do have to have the proper height stool but she is perfectly happy.
IMO there is nothing wrong with the SS scroll saw. Which saw do you have? We have the stand alone Teal saw. My wife sits for hours on a stool cutting. You do have to have the proper height stool but she is perfectly happy.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: spiral blades ,intarsia and the ss jig saw
I have the 18 inch saw I have only used it a few times seems my daughter's use it more then me
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: spiral blades ,intarsia and the ss jig saw
Maybe a stool should be the first project lol!
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- JPG
- Platinum Member
- Posts: 34648
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: spiral blades ,intarsia and the ss jig saw
Thatsa 'jig' saw fer sure. Yes it mounts high off the floor so standing can be an issue.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: spiral blades ,intarsia and the ss jig saw
This all started after visiting woodworks in Col. and found a book on intarsia and thought it looks like fun as well as a good way to use up the cut offs / scraps / . I have a few very young {future artist} who cant seem to set still when they are around , might as well get them started off right.
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: spiral blades ,intarsia and the ss jig saw
JPG I have a rubber floor mat that helps , however it only works for a short while .
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: spiral blades ,intarsia and the ss jig saw
OK, that is certainly a way to get started. I have two here and my wife used then to produce some nice things for a long time. They work well but a true scroll saw works better and is much smoother. Start with what you have and then go on.Hobbyman2 wrote:20190424_205801.jpg
I have the 18 inch saw I have only used it a few times seems my daughter's use it more then me
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: spiral blades ,intarsia and the ss jig saw
Thats good advise John ,thanks
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- chapmanruss
- Platinum Member
- Posts: 3497
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: spiral blades ,intarsia and the ss jig saw
As John said the Scroll Saw is better and provides a smoother cut for what you are wanting to do. A Scroll saw has two arms moving together providing even tension on the blade throughout the up and down cycle of the cut. A Jig Saw has a spring tension in the upper arm to pull the blade back up and also provides tension on the down stroke. Don't get rid of the Jig Saw though. It has it's uses. One thing it can do a Scroll Saw cannot is work as a Sabre Saw with the upper arm removed. A nice feature for cutting shapes in larger panels. I have both saws which I use for different purposes. I found my Scroll Saw, a gray one, used with a Power Station. A combination I like since it is not as bulky as it is sitting on a Mark V. Buying a stand alone Scroll Saw would be similar.
As for blades I have used blades from several manufacturers and have not had any problems with any of them. So no real recommendation for you.
As for blades I have used blades from several manufacturers and have not had any problems with any of them. So no real recommendation for you.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.