10ER Double Tilt idea

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderators: HopefulSSer, admin

User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: 10ER Double Tilt idea

Post by rpd »

This has come up before. :)

https://www.shopsmith.com/ss_forum/main ... ml#p245470

I think your base should work fine. For the left tilt position the table will need to be modified. It won't pivot 90 deg in that direction, and reversing it in the carriage results in the tie bar interfering with the spindle. There are pictures in the thread above that I copied from the yahoo group that show a table modification/solution.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
larryhrockisland
Gold Member
Posts: 241
Joined: Sun Aug 19, 2007 10:47 pm

Re: 10ER Double Tilt idea

Post by larryhrockisland »

rpd wrote:This has come up before. :)

https://www.shopsmith.com/ss_forum/main ... ml#p245470

I think your base should work fine. For the left tilt position the table will need to be modified. It won't pivot 90 deg in that direction, and reversing it in the carriage results in the tie bar interfering with the spindle. There are pictures in the thread above that I copied from the yahoo group that show a table modification/solution.
Thanks, I didn't remember seeing that one. I came up with a table using my old craftsman router table, parts from my 510 to 520 upgrade, aluminum angle from my brother and 1" tubes from old store fixtures.
Attachments
IMG_0243A.jpg
IMG_0243A.jpg (165.05 KiB) Viewed 9949 times
Imagine this one rotated 180 for shaping
Imagine this one rotated 180 for shaping
IMG_0244A.JPG (209.01 KiB) Viewed 9949 times
As a router table, maybe pin routing
As a router table, maybe pin routing
IMG_0254A.JPG (177.76 KiB) Viewed 9949 times
With support legs which I would use in the shaper setup too
With support legs which I would use in the shaper setup too
IMG_0255A.JPG (175.03 KiB) Viewed 9949 times
Larry Hargrove
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
User avatar
JPG
Platinum Member
Posts: 34608
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: 10ER Double Tilt idea

Post by JPG »

Oh I DO like folks who's brains wander outside the box!!!!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
larryhrockisland
Gold Member
Posts: 241
Joined: Sun Aug 19, 2007 10:47 pm

Re: 10ER Double Tilt idea

Post by larryhrockisland »

JPG wrote:Oh I DO like folks who's brains wander outside the box!!!!
Thanks, even if I don't do the double tilt I got a router table set up out of the exercise. :D :D :D
Larry Hargrove
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Post Reply