#2 Morse Taper Extension

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderators: HopefulSSer, admin

Post Reply
User avatar
everettdavis
Platinum Member
Posts: 2162
Joined: Thu Jul 17, 2014 11:49 am
Location: Lubbock, TX

#2 Morse Taper Extension

Post by everettdavis »

As a follow-up to private messages from folks who asked the purpose of the Morse Taper Extension discussed in an reply in another topic in Maintenance and Repair forum, rather than replying to them individually, it would be more informative here in the forums, and to create a topic for it in Tool Review Forum.

A Morse Taper Extension allows more flexibility with the use of lathe drive centers, revolving centers, drill chucks etc.which fit a No.2 Morse Taper. This type of adapter extends the accessory about 3-1/2" from the headstock or tailstock, providing more manipulation of turning tools, and at the headstock or tailstock. This allows deeper access turning bowls and similar operations.

A live center or other #2 Morse Taper on Shopsmith tailstock can be moved away from the tailstock 3-1/2" providing that access, and the Morse Taper Drift Key inserted into the slot in the extension provides a simple way to separate the center from the extension when finished.

See attached.

Everett
Morse Taper Extension and Drift Key.jpg
Morse Taper Extension and Drift Key.jpg (24.61 KiB) Viewed 7987 times
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: #2 Morse Taper Extension

Post by reible »

{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Post Reply