YouTube Videos featuring Shopsmiths

Moderators: HopefulSSer, admin

User avatar
JPG
Platinum Member
Posts: 34610
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: YouTube Videos featuring Shopsmiths

Post by JPG »

The use of gloves was a concern for me!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
ScottBelleri
Bronze Member
Posts: 5
Joined: Mon Nov 27, 2017 12:10 am

Re: YouTube Videos featuring Shopsmiths

Post by ScottBelleri »

[youtube]https://www.youtube.com/watch?v=EpoOKFeaTfM[/youtube]

I made this box as a gift for my friend Linn from the Darbin Orvar channel. We made plans to drive down to Corvallis to meet with Linn and her husband Matt, and I decided to make this wooden box for them as a gift. I used some tropical hardwood for the sides (I think it was Ipe), and cherry wood for the top and bottom. The liner was Paduk.

I only had a few days to make it, so I worked up until the last minute. I did what I could to save time, and ran into trouble fighting the clock on glue dry time. I clamped for the minimum required time, in a somewhat cold shop, and then used my disk sander on it. The joint opened up a bit, and I quickly injected some glue and reclamped. I usually clamp for way longer than the recommended time, but was curious about how far you could push it. I learned a lesson, and probably won’t do that again.

Even though I didn’t have time to put a finish on it, the project came out great. I was proud to give it to Linn and Matt.

Visit DarbinOrvar channel here: https://www.youtube.com/user/darbinorvar and her blog here: https://www.youtube.com/user/DarbinNotes

Follow me on instagram:https://www.instagram.com/scottbelleriwoodwork

Facebook: https://www.facebook.com/ScottBelleriWoodWork
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
jsburger
Platinum Member
Posts: 6396
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: YouTube Videos featuring Shopsmiths

Post by jsburger »

rpd wrote:[youtube]https://www.youtube.com/watch?v=c_-dVDaC8Wo[/youtube]
His Power Pro sure sounded noisy. The actual cutting sound did also so maybe it is just the way the audio was recorded.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
skou
Platinum Member
Posts: 1944
Joined: Fri Feb 16, 2007 2:53 am
Location: Mesa (near Phoenix) Az

Re: YouTube Videos featuring Shopsmiths

Post by skou »

rpd wrote:[youtube]https://www.youtube.com/watch?v=pFsrOAw068k[/youtube]
Sent this guy an invite.

Let's see if he joins.

steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.

Looking for one more, or some 9 inch extension table raisers.
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Post Reply