Shopsmith Forums

I am in the Dallas area and just checked. the listing is marked as removed by the poster.... it's gone...
I hope it found a good home.

I agree with spider. How the flag is folded is much more germane to the size of the flag. I have seen great folds that are very tight and really flat, and I've seen honor guard flag folds that could have been done better by first year Boy Scouts. IMHO, A custom case is usually a better fit than the...

"Is glueing up the two 3/4" pieces going to cause me any trouble?"

I may have missed it but I think you will need to glue up 4 pieces to get 1.5x1.5 from 3/4 inch stock.

So how is the project going?
Remember on initial setup alignment is a key consideration. IMHO If it is in good alignment to start with it is easier to keep things square.

1440x900 on mine but I can always fill as long as the format is right...

Thank for your effort.

I say we all take a deep breath and give the current administration a chance to implement their plans and if they don't improve life for everyone in 4 years, kick the bums out, in the meantime, let's all try to get along. :D Haven't they had more than three years in the election cycle with little t...

couldn't you take two extension tables and reverse one. Then run the tubes into them and see if the tables are level?

Just curious. Do you sell off the leftover loose hardware too or just the big ticket items? Dusty If this is directed to me... I will probably sell off the pulls as they will be coming from the 55 headstock. Gilmer drive and 3/4 hp motor that I will not need for spares. If the speed control is good...

the measurement you are making needs to be made in relation to the blade. You can use a square to check that the blade is perpendicular to the blade when set to zero degrees. (insure your square is 'square' first.) The level on the table assumes the blade is perpendicular to the floor and that the f...

Ok folks, My Do-It_yourself PowerPro Upgrade is being shipped shortly . I got a call today asking what type of headstock switch I have. Since I have Three headstocks and they all have the same type of power switch that is a no brainer but,,, I have an 86 headstock on my system that has been upgrade...