Shopsmith Forums

And not sure why pics are sideways... Done from iphone

The 610 refreshed as well

Should have written gilmer but it autocorrect

I just restored/rejuvenated my greenie tried some cuts and noticed a slow down in motor speed along with belt slippage smell... checked both belts... the filmed was fine but poly belt seems to be chewed up.. what would cause this as gilmer is tensioned to 1/8 to 1/4 deflection.

Tks... Was afraid wouldnt be easy ⚙

Ball not stuck and yes need to replace the gasket

Has anyone figured out how to replace the gasket on two halves... mines leaking.

The other view

Had a problem with both but got the front to back one figured out but I have a left to right( looking at cutting edge of blade) of about 1/16 of an inch movement... not sure if that is a lot. When I tried a practice cut follows the line I drew ok but notice the blow for removing saw dust from the tu...

I have the 610 manual but my question is what is the blade angle from the top and bottom. Mr looks like there is an inches or two variation which seems off. The maneal doesnt give info on this. Any help appreciated.