Shopsmith Forums

Saw this on CL
https://cnj.craigslist.org/tls/d/sayrev ... 45861.html
in sayerville cnj

First time posting one, hope ok.

Bob,
Sent you a pm

Never saw one like this, Mark 2 on label.

https://allentown.craigslist.org/tls/d/ ... 95169.html

Never saw one that looks like this Mark 2.
https://allentown.craigslist.org/tls/d/ ... 95169.html

Someone gave me a copy of Wood Handbook published in 1955 by the government so I check for a more recent one. It has everything I think you would ever want to know about wood and pictures. https://www.fpl.fs.fed.us/products/publications/several_pubs.php?grouping_id=100&header_id=p [ need to past...

Bill nailed it on #2. The two holes opposite each other are/should be thread and used to remove the arbor from the chuck. The three holes in a triangle are used to hold the adapter to the chuck. In should be used with either a tallon or oneway chuck. To use on a different lathe, you just need to get...

Oneway has a live center with interchangeable ends. It is a 3/4 x 10 thread. I have made several adapters that will thread onto the center by using 3/4 x 10 tap. https://oneway.ca/products-category/holding/Spurs,%20Drivers,%20Centers/Live%20Center/1%20MT%20Live%20Center The review (link in other pos...

They have been very tempting.

I have a 10er so the jack shaft was easy, didn't realize that you had a mark v. The $500 for a DVR to direct drive the SPT That price sparked an interest in thinking about it for a 10er. But at my age it is not worth it. It would be interesting to see if striatech would sell directly. Watching the d...

I have a jack shaft on my er. I put a adjustable pulley on the motor and on the jack shaft so I could get variable speed settings.I used a plywood v with a hinge at the v. Had a thread rod at the open end to adjust the belt. The pulleys were thread so that one side could move in or out which resulte...