Shopsmith Forums

I agree with the above. Once you have the sled, you wish you got one sooner!

Two references I've found useful are:
http://www.woodfinder.com/

The other is an article found in an old issue of Fine Woodworking magazine.

http://www.finewoodworking.com/2007/09/ ... ryard-list

Hopefully, this is helpful to you.

I had also been looking for 10 weight oil for my jigsaw crank case. I found Singer Sewing Machine Oil ( it is 10 weight ) in any fabric store like Jo Ann Fabrics for about $3.50 a bottle which is about 4 ounces. Also in some Wall Mart stores, there may be some available in the arts and crafts depart...

Ahhh,yes. I changed the orientation of the headless screw in the lower chuck after I took the pictures. It is now corrected. The lower chuck is affixed to the top of the lower chuck shaft. Luckily there were no burrs in the metal and the two parts mated seamlessly. Two holes are at the top of the sh...

Thanks for your comments. I should have included some pictures (since they are worth a thousand words). I have attached one picture of three showing the lower chuck in its lowest position with the lower guide post and fiber rod installed. The guide post is installed with the rod pointing upwards to ...

Bought an old Magna 610 18" jigsaw (with the large aluminum "C" arm) some time ago and learned after purchase that I was sold a unit with some missing parts ( lower guide post assembly creating tension on the blade beneath the table). I purchased some spare parts and attempted to inst...