Lodgepole wrote:I recently acquired the above mentioned chuck. Unfortunately the spindle is only about 1/2". Does anyone have any suggestions on how to modify it to be used on a Shopsmith?
Thanks in advance for any suggestions.
It looks like WoodRiver has discontinued that model.. I found this through Google, but it is showing it with a 3/4-16 internal thread for mounting https://www.woodcraft.com/products/expanding-collet-chuck-3-4-x-16-tpi
And this one on PSI with 1-8 female thread. https://www.pennstateind.com/store/CXC4.html
Is it possible that the #1MT shaft threads into the chuck body and is removable? If so, what is the size/TPI, there may be an adapter available to mount on the SS 5/8 spindle.
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,