phone  (937) 890-5197

Shopsmith Forums

%nbsp;

127 posts • Jump to page: 1 5 6 7 8 9 13

Re: Craigslist find = New project 10ER

#271614 by joebob80 » Wed Jun 24, 2020 10:59 pm

rpd wrote:Looks like the right sizes, I have read good things about the cogged style of belts from people whose experience I trust. When I get new belts that will be the style I go for.

https://sites.google.com/site/hogwinslowwoodworking/?fbclid=IwAR2OQOYxKWgi3jUCL45_syMbiYnq4Eh_lZRKiOm1srtWgsnNOxPG34rG3OY

http://www.mkctools.com/10erparts.htm


I emailed mkc tools on Monday and still haven't heard back.

I found them locally to pickup this weekend.

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271617 by joebob80 » Wed Jun 24, 2020 11:07 pm

BuckeyeDennis wrote:Those would be the correct modern belt sizes, according to 10 ER guru Skip Campbell, for a 1/2 hp motor.

What I’m confused about is why Skip specifically called out belt sizes for a 1/2 hp motor. As I understand it, the distance from the mounting feet to the shaft centerline should be the same for any Frame 56 motor. Not to mention shaft diameter, mounting-hole pattern, etc. In other words, all Frame 56 motors should be mechanically interchangeable in all critical mounting dimensions. This does exclude body length and diameter, which are not, strictly speaking, mounting dimensions (although they could affect clearances to the bench boards, etc.).

Perhaps the 3/4 hp motors available at the time were not Frame 56? :confused:


I read that post where Skip calls out the belt sizes for the 1/2 hp motor, but not for the 3/4 hp motor. This is the reason I was checking =).

Since I ended up finding them locally, I guess if it doesn't fix I could exchange them.

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271619 by rpd » Thu Jun 25, 2020 12:14 am

Skip moved several months ago, but the move hasn't gone smoothly. That was why I put the Hogwinslow link first. ;)
Good to hear you found some locally. :cool:

Skip posted this recently in the groups.io forum (replaced the old Yahoo 10ERusers group)

Skip
Jun 9 #356

Thank you for asking Herb. Sorry I haven't been on here in a while. Still in process on the move. It turned in to a money pit. Everything is having to be remodeled. Termite damage, electrical total redo, foundation problems, much more than we were counting on. No internet service yet. Plus my back is out and will probably have to have surgery if they say my heart is up to it. Never the less, we love the new place. 5 acres of oak trees and a fishing pond out my back door. And 1 mile from my brother and best friends. God is good.
Thanks to Terry Hennesy for pitching in here on managing the group.
--
Skip Campbell
mkctools.com
10ER #51683 1951

---

Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271639 by joebob80 » Thu Jun 25, 2020 12:16 pm

Thanks for sharing the post Ron.

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271640 by joebob80 » Thu Jun 25, 2020 12:27 pm

Got the jointer ready for some good cleaning.

Attachments

20200624_230430.jpg
20200624_230430.jpg (728.45 KiB) Viewed 2848 times
20200624_230438.jpg
20200624_230438.jpg (745.97 KiB) Viewed 2848 times
20200624_230441.jpg
20200624_230441.jpg (693.5 KiB) Viewed 2848 times
20200624_230457.jpg
20200624_230457.jpg (553.25 KiB) Viewed 2848 times
20200624_231034.jpg
20200624_231034.jpg (1.08 MiB) Viewed 2848 times
20200624_231041.jpg
20200624_231041.jpg (704.37 KiB) Viewed 2848 times
20200624_233032.jpg
20200624_233032.jpg (1.11 MiB) Viewed 2848 times

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271806 by joebob80 » Mon Jun 29, 2020 12:35 pm

Update -

Installed the new on/off switch and fired up the motor! Runs good. I didn't notice anything excessive noise or vibration after the initial quick on-off. SS is mostly reassembled, but I still have some touch-up waxing to finish after removing some paint splatter and a large stain on the base plate.

All the new belts should be ready for pickup today and I will finally get to try out the SS! Hopefully the floating pulley on the speed changer function properly on the unevenly worn shaft.

Parts question with photos - I tried looking for these, but didn't have any luck. SS product page is only useful if you know exactly what your looking for.

Attachments

20200628_200122.jpg
20200628_200122.jpg (600.66 KiB) Viewed 2653 times
20200628_200006.jpg
I'm missing the knob that locks the tail stock to the base plate (manual part #2337 Screw-Socket-Knurl). Is this something that I could still purchase?
20200628_200006.jpg (234.42 KiB) Viewed 2653 times
20200628_200201.jpg
Also missing the miter gauge indicator button and spring (manual part # A2312 and A2313). Are these something that I could still purchase? May be from a new model? Update - Found the needed parts off a spare miter gauge!
20200628_200201.jpg (1.03 MiB) Viewed 2653 times

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271823 by JPG » Mon Jun 29, 2020 2:46 pm

Tail stock retaining bolt not likely anywhere.(wish I had one)

Any bolt/knob will work unless you want to mount the table low. Only the table mount bracket will interfere.

Missing spring and 'detent'? Welcome to the club! Somebody PLEASE take a pix of the detent pin.

The pointer is already shown in your pix.

I recommend a flat washer between the segment and the locking knob.

Also a thin shim washer between the bar and the segment at the clamp screw. The pivot already has a shoulder.

---

╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271824 by jsburger » Mon Jun 29, 2020 3:09 pm

JPG wrote:Tail stock retaining bolt not likely anywhere.(wish I had one)

Any bolt/knob will work unless you want to mount the table low. Only the table mount bracket will interfere.

Missing spring and 'detent'? Welcome to the club! Somebody PLEASE take a pix of the detent pin.

The pointer is already shown in your pix.

I recommend a flat washer between the segment and the locking knob.

Also a thin shim washer between the bar and the segment at the clamp screw. The pivot already has a shoulder.


10ER knobs show up fairly regularly on eBay.

Attachments

20200629_125943.jpg
20200629_125943.jpg (105.56 KiB) Viewed 2632 times
20200629_130002.jpg
20200629_130002.jpg (149.35 KiB) Viewed 2632 times

---

John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271825 by JPG » Mon Jun 29, 2020 3:16 pm

jsburger wrote:
JPG wrote:Tail stock retaining bolt not likely anywhere.(wish I had one)

Any bolt/knob will work unless you want to mount the table low. Only the table mount bracket will interfere.

Missing spring and 'detent'? Welcome to the club! Somebody PLEASE take a pix of the detent pin.

The pointer is already shown in your pix.

I recommend a flat washer between the segment and the locking knob.

Also a thin shim washer between the bar and the segment at the clamp screw. The pivot already has a shoulder.


10ER knobs show up fairly regularly on eBay.


THANK YOU!!!!!!

Essentially a dome (spherical) shape end or is it parabolic(bullet shape)?

---

╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply  Reply with quote 

Re: Craigslist find = New project 10ER

#271826 by jsburger » Mon Jun 29, 2020 3:19 pm

It looks spherical to me.

---

John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT

Post a reply  Reply with quote 

Who is online

Users browsing this forum: No registered users and 177 guests

Board indexDelete all board cookies

Welcome to Shopsmith. Please fill in this form and we'll send you more information and special offers for the Shopsmith MARK 7 and other woodworking topics.

Subscribe to our mailing list

* indicates required
cron