I think your base should work fine. For the left tilt position the table will need to be modified. It won't pivot 90 deg in that direction, and reversing it in the carriage results in the tie bar interfering with the spindle. There are pictures in the thread above that I copied from the yahoo group that show a table modification/solution.
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,