phone   (937) 890-5197

Technical Support (937) 890-5197
FREE
D-I-Y Support
ENGINEERING
SUPPORT
CUSTOMER
REPAIR

Shopsmith Most Frequently Ordered Service Parts

The 17 Most Frequently Ordered Shopsmith Service Parts

Most Frequently Ordered Service Parts

A. DC 3300 Dust Collector Fan May require replacement if your DC3300 seems to lack sufficient power to pick-up. A roaring noise indicates that replacement is required.

515287 DC3300 Dust Collector Fan
Regularly: $35.70   Sale Price: $28.56 -- You Save $7.14

B. Gilmer Belt May require replacement if your Mark V bogs down during use, or if your belt is frayed or broken. NOTE: Installation instructions are included with your belt purchase.

521683 Gilmer Belt
Regularly: $34.87   Sale Price: $27.90 -- You Save $6.97

C. Motor Drive Belt May require replacement if your Mark V is vibrating excessively, or the belt is frayed or broken. NOTE: Installation instructions are included with your belt purchase.

521682 Motor Drive Belt
Regularly: $19.99   Sale Price: $15.99 -- You Save $4.00

D. Poly-V Belt May require replacement if your Mark V bogs down during use, or if your belt is frayed or broken. NOTE: Installation instructions are included with your belt purchase.

521681 Poly-V Belt
Regularly: $24.85   Sale Price: $19.88 -- You Save $4.97

E. Caster Wheel Use these to replace the worn-out wheels on your Shopsmith casters.

522215 Caster Wheel ...   $4.95

F. Jointer Fence Tilt Quadrant May require replacement if the outfeed end of the jointer fence raises too high off the outfeed table surface, or if the fence lock handle fails to hold the fence at the proper angle when tightened.

502651 Jointer Fence Tilt Quadrant
Regularly: $44.07   Sale Price: $35.26 -- You Save $8.81

G. Speed Control Assembly Includes all the parts required for repairing speed changing problems. An assembly for those customers who prefer to replace the entire assembly instead of the individual parts.

504198 Speed Control Assembly
Regularly: $84.99   Sale Price: $67.99 -- You Save $17.00

H. Quadrant Assembly This small, “pork-chop” shaped piece with teeth on the back side of the speed dial may need to be replaced if your Mark V's speed fails to increase when turning the dial.

504221 Quadrant Assembly
Regularly: $27.81   Sale Price: $22.25 -- You Save $5.56

I. Control Sheave Assembly May require replacement in the event the bearing gets clogged and ceases to turn, or if the snap-on rectangular retaining loop pulls off the end of the control sheave.

515556 Control Sheave Assembly
Regularly: $56.65   Sale Price: $45.32 -- You Save $11.33

J. Help Kit Hardware Pack Be prepared... order this collection of assorted setscrews and shims for your Mark V and other Shopsmith accessories. It contains: (18) Assorted Shims (20) 5/16"-18 x 1/4" Socket-Head Setscrews, (6) 5/16"-18 x 3/8" Socket-Head Setscrews, (5) 5/16"-18 x 3/8" Motor Pan Setscrews with nylon locks, (5) 1/4"-20 Flat-Head Table Insert Setscrews, and (1) 1/4"-20 x 1/2" Round-Head Setscrew

515714 Help Kit Hardware Pack
Regularly: $29.80   Sale Price: $23.84 -- You Save $5.96

K. Locking Toggle Switch

556089 Locking Toggle Switch
Regularly: $32.41   Sale Price: $25.93 -- You Save $6.48

L. Older Style Toggle Switch

515605 Older-Style Toggle Switch
Regularly: $29.19   Sale Price: $23.35 -- You Save $5.84

M. Headstock Lock and Wedges These may require replacement if the Mark V headstock lock fails to turn, yet the headstock still slides on the way tubes; or if the lock is loosened, yet the head stock fails to slide. Order all three part numbers for the most effective repair.

513014 Lock Handle and Threaded Connecting Rod
Regularly: $26.69   Sale Price: $21.35 -- You Save $5.34

N. Right-Hand Wedge

504234 Right-Hand Wedge
Regularly: $8.95   Sale Price: $7.16 -- You Save $1.79

O. Left-Hand Wedge

504235 Left-Hand Wedge
Regularly: $8.95   Sale Price: $7.16 -- You Save $1.79

P. Speed Control Handle The portion of the speed dial that is turned with the fingers. Stripped gears may necessitate its replacement if the machine speed changes while the speed dial remains at the same setting.

504229 Speed Control Handle
Regularly: $33.95   Sale Price: $27.16 -- You Save $6.79

Q. Quill Feed Handle Assembly One of the most frequently lost parts. Comes complete with hub.

513682 Quill Feed Handle Assembly
Regularly: $22.47   Sale Price: $17.98 -- You Save $4.49

Order on the Web or by Phone, if you prefer -- (937) 890-5197.

Call before 4:30 PM Eastern Time

Welcome to Shopsmith. Please fill in this form and we'll send you more information about the Shopsmith MARK 7 and other woodworking topics.

Subscribe to our mailing list

* indicates required