MiterSet Standard (Exclusively made for Shopsmith) PART #556458

Get a MiterSet Jig to Quickly Make Angled Segments and Perfect Mitered Corners!

$119.00

-
+

-

(0 Customer Reviews)

The Can't Miss Details

One of the most common headaches in woodworking is making accurate miter cuts. Whether you're creating unique segmented wood pieces, constructing a picture frame, or doing high-end finish work, a well-cut joint is easy to appreciate.

You may be thinking two things are necessary for a no-gap miter joint:
(1) A correctly calculated and set miter angle;
(2) Pieces cut to the right length.

Getting the right length is achieved with accessories like the 24" Aluminum Miter Gauge Extension, the 20" Aluminum Miter Gauge Extension, or the Shopsmith miter stop rod. But, until now, getting the correct angle has been more difficult and time consuming. The Solution: The MiterSet!

The MiterSet Standard Stands Out with Accurate and Fast Set-up at ½ Degree Increments
• Eliminate concerns about how accurately you’ve set-up your Miter Gauge indicator plate.
• Avoid the potential mistake of counting markings or notches between labeled angles

With the MiterSet Standard, just place one pin in the zero hole and the other in the hole for the desired angle. The holes are clearly labeled with large, easy-to-read numbers giving the angle at every 5 degrees. For angles that are not a multiple of 5 degrees, you'll use the included detent bar to add or subtract up to 2 ½ degrees, in ½ degree increments. Then, loosen your miter gauge lock. Place your miter gauge bar in the MiterSet slot (which was made specially for an accurate fit of your Shopsmith miter gauge bar). Slide your miter gauge against the pins, and then relock your miter gauge. That quickly, your miter gauge will be flawlessly set to the angle you need for your project.

Now You're Ready to Cut Some Precise Angles Quickly & Accurately!

MiterSet Segments For Segmented Turnings - No Math Required!

Using the MiterSet Segments is even one step easier. Normally, when cutting segments, you'd have to calculate the angles. Or, maybe you would need to find your look-up chart to determine the angle you need based on the number of sides in your project. The MiterSet Segment jig eliminates the need for these tedious steps, making it effortless.

Here's How it Works.
• Plug in the base pin;
• Plug the 2nd pin in the hole clearly labeled with the number of sides.
• That's it, the MiterSet has selected and set the correct angle. All that is left to do, is again to place your miter gauge in the slot and slide the miter face against the pins to set the exact angle.

You save the frustration, trial-and-error, and wasted wood that comes with a conventional approach.

Includes: MiterSet, (2) Pins, Detent Bar (Standard jig only), Padded Protective Case, and Instructions.

BUNDLE & SAVE
556461 MiterSet Standard & Segments Set Gives You Both Great MiterSets (Exclusively Made for Shopsmith) at a Great Bundled Price!
Part NumberNameSpecifications
556458MiterSet Standard (Exclusively made for Shopsmith)MiterSet Product Details:
• All components proudly made in the USA
• Works with your existing miter gauge. All the jigs and fixtures you already have, work unchanged.
• CNC milled from 6051 aluminum plate for precise accuracy and durability.
• Anodized to protect the surface from discoloration
• 2mm neoprene rubber backing to keep it from sliding around on your work surface.
• Comes in a padded, protective case to keep the pieces in one convenient, findable place.

Includes:
• MiterSet
• (2) Pins
• Detent Bar (Standard jig only)
• Padded Protective Case
• Instructions

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. Normal item shipped via UPS Groud or USPS View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
MiterSet Standard (Exclusively made for Shopsmith) 556458

$119.00Add to cart