Multi-Sand Complete Drum Sanding Starter Package (for All MARKS except MARK V 500) PART #556256

SHOPSMITH EXCLUSIVE! The Perfect Solution for Easy Changeovers Between Multiple Sanding Drums!

$124.90

-
+

-

(0 Customer Reviews)

The Can't Miss Details

Achieving the highest quality, smoothest wood finish must start with a perfectly smooth surface. Achieving that smoothness (especially on a Curved Edge) usually means incrementally sanding raw workpiece edges with coarse, medium and fine grit abrasives. Skip a step and you will end up with poor results.

Without Shopsmith’s Multi-Sand Process, You Would Likely Follow a Normal 3-Step Changeover Process:
1. Install a coarse sleeve to remove the majority of the sawing marks.
2. Repeat the process by removing the coarse sleeve from your drum and replacing it with a medium sleeve.
3. Repeat the process again by replacing the medium sleeve with a fine sleeve and complete your final step.

What if you could cut those three installation steps down to just one — and spend more time sanding and less time changing? You can, thank Shopsmith's Multi-Sand Drum Sleeves!

Shopsmith Multi-Sand Sleeves Eliminate the Changeovers and Get the Job Done Faster!

Here's How It Works:
• Install a 2" high x 2-5/16" diameter fine grit Multi-Sand Sleeve, sliding it all the way to the top of the 6" drum followed by a 2" medium grit sleeve, and finally a 2" coarse grit sleeve.
• Attach the sanding drum to your spindle and you're ready to start sanding.
• Remember, your MARK gives you 4-1/4" of up-down quill travel. That means you can go through all three steps of the sanding process on any piece of stock up to 1" thick by simply moving your quill down for each subsequent step.
With no sleeve changing, nothing could be simpler or faster!

Multi-Sand Drum Sanding Complete Package Includes:
• 6" x 2-5/16" Drum Sander
• 1 Each Coarse, Medium, and Fine 2" Long Sanding Sleeves
• Vacuum Attachment
• Vacuum Extender
• Table Insert

Getting Started Is Amazingly Affordable!
If you already own the Shopsmith 6" Drum Sander, all you need to get started is a package of our assorted Multi-Sand Sleeves.

If you don't yet own a Shopsmith 6" Drum Sander or any of the optional drum sanding table inserts or vacuum attachments, order the following:
Table Inserts:
• 555119 Drum Sanding Table Insert (for MARK 7 / MARK V 520, 510, 505 / MARK 4)
• 556267 Drum Sanding Table Insert (MARK V 500)
Vacuum Attachments:
• 556257 Drum Sander Vacuum Attachment and Extender (for MARK 7 / MARK V 520, 510, 505 / MARK 4)
• 556265 Drum Sander Vacuum Attachment and Extender (for MARK V 500)
• 556268 Extender (with bolts and spacers) (for MARK 7 / MARK V 520, 510, 505 / MARK 4)
• 556269 Extender (with bolts and spacers) (for MARK V 500)

Note: Extender is required for those who already own the correct drum sander table insert & drum sander vacuum attachment)
Part NumberNameSpecifications
556256Multi-Sand Complete Drum Sanding Starter Package (for All MARKS except MARK V 500)Multi-Sand Drum Sanding Complete Package Includes:
• 6" x 2-5-16" Drum Sander
• 1 Each Coarse 60-Grit, Medium 80-Grit and Fine 100-Grit, Garnet 2" Long Sanding Sleeves
• Vacuum Attachment
• Vacuum Extender (for MARK 7 / MARK V 520, 510, 505 /MARK 4)
• Table Insert (for MARK 7 / MARK V 520, 510, 505 /MARK 4)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. Normal item shipped via UPS Groud or USPS View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
Multi-Sand Complete Drum Sanding Starter Package (for All MARKS except MARK V 500) 556256

$124.90Add to cart