gap-free glue joints on mitered corners of any multi-sided
object without trial-and error setups!
new MITER 5000 SLED blends incremental angle control features
with a very special 3-panel laminated SLED and a longer fence
for the ultimate miter cutting workstation for your Shopsmith
MARK V table saw.
Sled consists of three laminated MDF panels with two embedded
aluminum T-tracks for securing an included work piece hold
down clamp. A renewable right panel provides zero-clearance
tear-out control and cut-off support on BOTH sides of the
get absolute rigid support for the 36” to 64” telescoping
IncraLOCK Cut-off Fence. Allows you to crosscut a 25” wide
board on your MARK V with full control.
it's your basic 90° cut-off, simple pictures frames, complex
compound miters, or a 20-sided object, the MiterSled 5000
delivers perfect repeatable accuracy ... first time ... every
time ... any angle. The precision angle indexing teeth allows
364 positive angle stops in 1/2” increments over a full plus
or minus 90 degree range. It is also continuously adjustable
between 1/2 degree steps.
the Miter5000, 36" IncraLock Flip-Fence with Dual-Arm Flip-Shop
stop Positioner telescopes to 64", Incra Protractor and 3-piece
MDF laminated Sled.
Incra MiterSled 5000 - Fits Mark V Model
510 & 520 with Pro Fence System, and MARK 7
in additional Table