Shopsmith's Pro Fence & Table System Upgrade is the best way for You to equip Your older MARK V 500 with the latest in features and capabilities You would experience with the MARK 7 Pro Fence and Table System. Armed with this state-of-the-art fence and table system, you'll be able to tackle all of your projects with improved convenience, precision and safety.

Your Upgrade starts with an expanded table system that includes a larger worktable and extension table with two floating support tables and a pair of telescoping support legs. Put it all together and you'll have over eight feet of table width for crosscutting even the longest boards!

Plus, it adds the heavy-duty, factory-aligned Shopsmith Pro Fence with four T-slots (two on the top and one on each face for attaching jigs & fixtures).

The Pro Fence and Table System Upgrade Kit Includes:
• Larger Table with big 17-1/2" x 22" work surface. More support for ripping 4' x 8' plywood sheets and crosscutting even the longest boards.
• Pro Fence is 24-1/2" long by 2-1/2" thick with a double T-slot track on the top surface plus another T-slot on each side for attaching accessories, jigs and fixtures. Two levers lock it rigidly to the front and rear of the main or extension table with a quick flip. Also includes a wider fence straddler.
• Wider Tie Bar with dual tilt locks at the front and rear of the table. The widened tube stance for dust collection and gives added stability.
• New Table Carriage with quarter-turn locks. Hand wheel and lock move the table up and down - then secure it where you want it.
• Direct-Reading Rip Fence Scales let you read and instantly set the width of rip cuts up to 38-1/2" wide. Includes two interchangeable stainless steel scales that are graduated in both 1/16" and 1/32" increments.
• Two Floating Extension Tables slide on connecting tubes and lock any-where between the main table and the end extension table.
• Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.
• Two Telescoping Legs give added support in the middle or at the ends of the connecting tubes. A quick twist locks their height.
• See-Through Upper Saw Guard with etched-in depth-of-cut indicators, European-style riving knife and anti-kickback device.
• Lower Saw Guard, updated to accommodate Shopsmith's 12" sanding disc. Includes 2-1/2" diameter dust collection port.

Plus You'll also Get:
• Two-position Lathe Tool Rest Arm with lever-style adjustment screws
• Anti-rotation Tool Rest Post
• Saw Table Insert
• Steel Miter Gauge Bar with T-slot washer
• Larger Extension Table Top (does not include vertical mounting tubes)
• New 12" Steel Sanding Disc Hub (Hub Only - Steel Sanding Discs Sold Separately)
• New 1-1/4" diameter saw arbor
• All required fittings and hardware
• Instruction Manual, fully describing alignment, maintenance, safety, tips and techniques
• Special Alignment Set-Up Gauge

Note: Due to the increased size of the Pro Fence System work table and how various accessories connect to it, Some earlier MARK V 500 accessories may not fit the Pro Fence Upgrade. These include (but are not limited to) all table inserts, front table extension, rip fence, mortising hold-downs and some saw arbors.

Increase Your MARK s Outboard Support When Ripping Large Panels Or Cross-Cutting Long Boards by Adding 5-Foot Connector Tubes

Just slip these extra-long tubes into the rails of your MARK ’s (for All MARKs except MARK V 500 unless Upgraded) main table or extension table to get all the added support you need for sawing, drilling, sanding, shaping or performing virtually any operation with extra large or long workpieces. Your existing telescoping legs and floating extension tables also work with these tubes.

Note: Not compatible with Model 500 Mark Vs unless it has been Upgraded.