DC3300 Dust Collector Filter Hoods
Optional Filter Hoods Let You Choose Your Level of Dust Collection Efficiency
The filter hood of a dust collector cleans the air that's returned to the environment once the dust is removed. As it does this, a cake of dust forms on the inside of the Hood. As the cake gets thicker, the hood traps smaller and smaller particles, increasing its dust-capturing efficiency.
Our standard 12" hood is designed to capture particles as small as 7 microns in size... the 24" model will capture particles as small as 5 microns... and the super 42" model will capture particles down to an amazing 1 micron in size ! The two optional (24" & 42") hoods offer up to four times the surface area of our original equipment hood, and that helps them maintain optimum airflow, even though the internal cake is thickening and the particle size is getting smaller.
Made of a special polyester felt, all three Hoods are fully washable, although this is seldom necessary. When you feel that the airflow has been reduced below a level that you're comfortable with, simply turn on your dust collector and tap the sides of the hood firmly several times to dislodge the cake from the inside of the Hood.
The 42" hood comes complete with a Support Rod, Mounting Brackets, a Drilling Template and complete instructions for attaching the rod to your DC-3300.
Below are links to PDF files of the 42" filter hood manual and drilling template.
514808 DC3300 12" Original Equipment Hood ... $39.99
556710 DC-6000 12" Original Equipment Filter Hood ... $39.99
300008 24" Filter Hood ... $44.99
555942 42" Filter Hood ... $89.95
Other Items You May Need
Order on the Web or by Phone, if you prefer --
Call before Eastern Time
Copyright © 2018 RLFShop LLC-Shopsmith All rights reserved.