info@shopsmith.com
NEW! A.G.E. Industrial by Amana Specialty Saw Blades
Buy an Amana Tool High-Quality, German-Made A.G.E Specialty Saw Blade & Get a Shopsmith Saw Blade Arbor FREE! ($32 Value)
MD10-802 CARBIDE TIPPED PLASTIC 10” DIA X 80T M-TCG, -2 DEG, 5/8 BORE SAW BLADE
BEST FOR: PLEXI-GLASS, ACRYLICS, & SHEET PLASTICS
Specially designed for smooth, chip-free cutting of plastics, acrylics, and plexi-glass. Higher tooth count blades will work better in thinner material. These saw blades are also suitable for crosscutting, trimming, and mitering wood and are excellent for cutting plywood, laminate on particle board, and plastic laminate flooring
-
Features:
- Carbide Tipped
- M-TCG (Modified Triple Chip Grind) & M-ATB
- Cuts Clean, No-Melt, Chip-Free Cuts in PVC, Acrylics, and other Plastics
- Higher Tooth Count Blades Will Work Better in Thin Materials
-
Specifications:
- Diameter: 10"
- Teeth: 80
- Grind: M-ATB
- Kerf: 0.126" (3.2mm)
- Plate: 0.071" (2.0mm)
- Hook Angle: -3°
555987 A.G.E. Industrial Plastics/Acrylics Saw Blade ... $114.98
NOW Shopsmith Special Offer
Get a FREE Saw Blade Arbor ($32 Value) PLUS Shopsmith Special Price of $114.98
MD10-601 CARBIDE TIPPED PLYWOOD & LAMINATE 10” DIA X 60T TCG, 12 DEG, 5/8 BORE SAW BLADE
BEST FOR: PLYWOOD & SINGLE-SIDED LAMINATE
This blade is specifi cally designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind, and 10-degree hook angle provide an excellent balance between feed resistance and finish.
-
Features:
- Carbide Tipped
- TCG (Triple Chip Grind & Flat Raker)
- General Cut-Off & Trimming
-
Specifications:
- Diameter: 10"
- Teeth: 60
- Kerf: 0.126" (3.2mm)
- Plate: 0.087" (2.2mm)
- Hook Angle: 12°
555989 A.G.E. Industrial Plywood/Laminate Saw Blade ... $79.98
NOW Shopsmith Special Offer
Get a FREE Saw Blade Arbor ($32 Value) PLUS Shopsmith Special Price of $79.98
MD10-805 A.G.E. CARBIDE TIPPED THIN WALLED ALUMINUM & NON-FERROUS METALS 10” DIA X 80T TCG, -5 DEG, 5/8 BORE SAW BLADE
BEST FOR: ALUMINUM & NON-FERROUS METALS
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant or blade wax and clamp down the work piece when cutting non-ferrous metals.
-
Features:
- Carbide Tipped
- M-TCG (Modifi ed Triple Chip Grind)
Warning: NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades. See Shopsmith.com for additional safety information.
NOTE: Due to the rough applications for which these blades are used, they are not guaranteed.
-
Specifications:
- Diameter: 10"
- Teeth: 100
- Kerf: 0.126" (3.2mm)
- Plate: 0.100" (2.5mm)
- Hook Angle: -5°
555988 Industrial Aluminum/Non-Ferrous Metals Saw Blade ... $128.98
NOW Shopsmith Special Offer
Get a FREE Saw Blade Arbor ($32 Value) PLUS Shopsmith Special Price of $128.98
Order on the Web or by Phone, if you prefer --
(937) 890-5197.
Call before 4:30 PM Eastern Time
© SHOPSMITH - DREAM IT! BUILD IT! SHARE IT!