Shopsmith Forums -- Dream It! Build It! Share It!

info@shopsmith.com

(800) 543-7586

%nbsp;

Forum Home Page ‹ Main Woodworking Forum ‹ Maintenance and Repair

• FAQ • Print view • Register • Login

lower blade guard

10 posts • Page 1 of 1

lower blade guard

#86637 by assembfurn » Fri Mar 11, 2011 1:07 pm

assembfurn Bronze Member (1 Posts)

[ATTACH]12189[/ATTACH]

[ATTACH]12190[/ATTACH]

[ATTACH]12191[/ATTACH]I've been woodworking 20 yrs and just inherited a Mark 5. The lower blade guard was not attached but was included with the machine. When I attach the lower guard and then try to mount the arbor and blade, the blace would be perfectly aligned with the outside of the lower guard. I have tried for over a week to see what is wrong. Guess its time to ask for some more experience help. It looks like it would fit if I took off the silver aluminum collar but I don't think that's the problem. If it helps any, the serial number is 12183 and the model is 505644.
Thanks,
Assembfurn

Attachments

: 100_2346.jpg (140.22 KiB) Viewed 346 times

: 100_2347.jpg (147.15 KiB) Viewed 332 times

: 100_2348.jpg (136.22 KiB) Viewed 342 times

Post a reply Reply with quote

#86639 by judaspre1982 » Fri Mar 11, 2011 1:45 pm

judaspre1982 Platinum Member (1277 Posts)
Location: New Castle DE

I believe you have a 505/510/520 saw arbor with a 500 model saw guard. The 500 model table system uses shorter arbors to align the blade to the table slot. I think the 500 arbors are about 3/8 in shorter.

Dave

Post a reply Reply with quote

#86640 by judaspre1982 » Fri Mar 11, 2011 1:51 pm

judaspre1982 Platinum Member (1277 Posts)
Location: New Castle DE

This thread has some more info.
http://www.shopsmith.net/forums/showthread.htm?t=3772&highlight=500+arbor
Do a search on saw arbors you will find more info.

Dave

Post a reply Reply with quote

#86641 by dusty » Fri Mar 11, 2011 2:00 pm

dusty Platinum Member (14035 Posts)
Location: Tucson (Wildcat Country), Arizona

assembfurn wrote:[ATTACH]12189[/ATTACH]

[ATTACH]12190[/ATTACH]

[ATTACH]12191[/ATTACH]I've been woodworking 20 yrs and just inherited a Mark 5. The lower blade guard was not attached but was included with the machine. When I attach the lower guard and then try to mount the arbor and blade, the blace would be perfectly aligned with the outside of the lower guard. I have tried for over a week to see what is wrong. Guess its time to ask for some more experience help. It looks like it would fit if I took off the silver aluminum collar but I don't think that's the problem. If it helps any, the serial number is 12183 and the model is 505644.
Thanks,
Assembfurn

Welcome to the family. It is always good to gain another new member. I apologize for not jumping in here to answer your questions but I do not have that model and can not. The images that you show seem to show a different lower blade guard than I have.

I have attached a reference chart that details the production schedule for older model Mark V/5s.

Can you post an image of the name plate and serial number plate.

---

"Making Sawdust Safely"
Dusty

"If one's words are not better than silence, one should keep silent." -Caine

Post a reply Reply with quote

#86646 by JPG » Fri Mar 11, 2011 3:11 pm

JPG Platinum Member (20480 Posts)
Location: Lexington, Ky (WILDCAT territory)

1) The arbor is the longer version intended to be used on a 505/510/520 model(larger tables etc.)

2) You have a 500(the carriage tells the tale) which requires a much shorter arbor. The blade is then actually inside the end of the quill shaft.

3) The important difference is that the blade is 3/8" closer to the quill end of the arbor on the shorter '500' version.

---

JPG

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply Reply with quote

#86647 by beeg » Fri Mar 11, 2011 3:31 pm

beeg Platinum Member (3917 Posts)
Location: St. Louis, Mo.

JPG40504 wrote:1) The arbor is the longer version intended to be used on a 505/510/520 model(larger tables etc.)

2) You have a 500(the carriage tells the tale) which requires a much shorter arbor. The blade is then actually inside the end of the quill shaft.

3) The important difference is that the blade is 3/8" closer to the quill end of the arbor on the shorter '500' version.

[color="Blue"]See post two. [/color]

---

SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob

Post a reply Reply with quote

#86666 by JPG » Fri Mar 11, 2011 5:12 pm

JPG Platinum Member (20480 Posts)
Location: Lexington, Ky (WILDCAT territory)

beeg wrote:See post two.

Hey! There IS a difference between 'I think' and 'is'.

The overall length(shorter) is not relevant to his problem. The quill end to blade spacing 'is'.

Also a difference between 'I believe you have' and 'you have'.

He needs to know the arbor is not intended for use on his model. The saw guard is just one problem using that longer arbor will create.

PAX Citizen!

---

Post a reply Reply with quote

#86667 by pennview » Fri Mar 11, 2011 5:44 pm

pennview Platinum Member (1608 Posts)

In Power Tool Woodworking for Everyone a spacer is described for using the metal lower saw guard on a model 500 with dado blades. This moves the end panel of the guard over by 1 1/4". I don't know if this is appropriate for the issue at hand, but one could check with Customer Service:

[ATTACH]12196[/ATTACH]

Guard Spacer (Mark V with Metal Lower Saw Guard Only)- Because the dado accessory can be used for extra-wide cuts, you must place a spacer (offered free through Customer Service) between the two halves of the lower saw guard. If you want to make a spacer, remove the cover from the guard and trace its contour on a piece of 1-1/4" stock that measures 3-1/2" wide by 10" long. Mark the location of the bolt holes and then draw another line parallel to the first one but about 1/4" smaller. Cut the stock on a bandsaw or scroll saw, and drill 9/32" holes for the attachment bolts. When you are finished, the spacer should look like the one shown in Figure 3-23. Secure the spacer between the two halves of the lower saw guard with 1/4"-20 x 1-3/4" bolts

Attachments

: F3-23LG.jpg (4.67 KiB) Viewed 265 times

---

Art in Western Pennsylvania

Post a reply Reply with quote

#86670 by SDSSmith » Fri Mar 11, 2011 7:04 pm

SDSSmith Platinum Member (1873 Posts)
Location: San Diego, CA

[quote="JPG40504"]Hey! There IS a difference between 'I think' and 'is'.]This reminds me of something....[ATTACH]12198[/ATTACH]......and going and going.

Attachments

: bunny.gif (46.99 KiB) Viewed 298 times

---

Rob in San Diego
Email: SDSSmith51 AT gmail.com

Post a reply Reply with quote

#86680 by JPG » Fri Mar 11, 2011 8:38 pm

JPG Platinum Member (20480 Posts)
Location: Lexington, Ky (WILDCAT territory)

SDSSmith wrote:This reminds me of something....[ATTACH]12198[/ATTACH][font=Times New Roman]......and going and going.]

At least he knows 'where'!;)

---

Post a reply Reply with quote

10 posts • Page 1 of 1

Return To Maintenance and Repair

Who is online

Users browsing this forum: neal560sl and 1 guest

Board index• Delete all board cookies •