Friday night "What is it?"
Moderators: HopefulSSer, admin
Friday night "What is it?"
The shop is going through yet another reorg and this showed up so I figured it might be interesting to know if anyone knows what it is. I've had this for a long time so I had to check to see if they still sell them and they do. A lot more expensive then I remember but so what else is new.
It is something that I learned about 56 years ago. They were in common use back then but it doesn't seem like something that is used much anymore.
So what is this?
Either a common name or what it is used for will work.
Ed
It is something that I learned about 56 years ago. They were in common use back then but it doesn't seem like something that is used much anymore.
So what is this?
Either a common name or what it is used for will work.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Friday night "What is it?"
Is that a dipstick for a house oil tank?
Re: Friday night "What is it?"
Grain thief?"\
Ron--K6VPV
510, upgraded to 520, now PowerPro, bandsaw, jointer, belt sander, jointmatic, scroll saw, strip sander, pro planer, OPR, DC3300, and more.
510, upgraded to 520, now PowerPro, bandsaw, jointer, belt sander, jointmatic, scroll saw, strip sander, pro planer, OPR, DC3300, and more.
Re: Friday night "What is it?"
I'll add another image that might help.
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Friday night "What is it?"
Until I saw the second picture I was sure it was what we used to call a 'yardstick'. Apparently this is about the other thing. Doesn't look very interesting so maybe it's a boring tool.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
- JPG
- Platinum Member
- Posts: 34648
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Friday night "What is it?"
That second pix has created confusion fer me. Until it 'appeared', I was thinking that what appears to be threads may be coiled spring wire and therefore it is a plumbing snake but the long part makes it unable to negotiate bends(traps...)
If it is threaded I assume the handle can reach the close end of the threads(closer to the near end in the pic). So some kind of boring bar???
If it is threaded I assume the handle can reach the close end of the threads(closer to the near end in the pic). So some kind of boring bar???
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Friday night "What is it?"
The second device looks similar to a dead center, but it looks like it would cut out a piece of the material. I had two thoughts, first was that it would be used to cut into each end of a piece ce of stock that had just been turned for a lamp. You would then need to chisel out the remaining material. The the first tool could be used to clean up the long hole through the newly turned lamp so you could put the electric cord through it.
Second thought was that the second tool would be used to cut rubber, felt, or moleskin grommets.
I don’t see threads on the first tool. I have no idea what these are.
Second thought was that the second tool would be used to cut rubber, felt, or moleskin grommets.
I don’t see threads on the first tool. I have no idea what these are.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
- RobertTaylor
- Platinum Member
- Posts: 560
- Joined: Mon Sep 03, 2007 9:28 am
- Location: North Canton, Ohio
Re: Friday night "What is it?"
It's a lamp drill, it will fit through the center in the second picture.
Re: Friday night "What is it?"
Ha! Our posts were one second apart.RobertTaylor wrote: ↑Sat Oct 16, 2021 10:26 am It's a lamp drill, it will fit through the center in the second picture.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Friday night "What is it?"
Lamp auger bit or sometimes called a shell auger. This one is a 3/8" but I have seen 5/16" versions.
The dead center has a removable point and guess what the hole left behind is 3/8".
Now this is only one way to do this operation and lamps are only one thing that can be drilled this way.
Stay tuned for some other goodies a bit later today.
Ed
The dead center has a removable point and guess what the hole left behind is 3/8".
Now this is only one way to do this operation and lamps are only one thing that can be drilled this way.
Stay tuned for some other goodies a bit later today.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]