Page 16 of 52
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Jan 13, 2018 10:59 pm
by JPG
The use of gloves was a concern for me!
Re: YouTube Videos featuring Shopsmiths
Posted: Thu Feb 01, 2018 4:58 pm
by ScottBelleri
[youtube]
https://www.youtube.com/watch?v=EpoOKFeaTfM[/youtube]
I made this box as a gift for my friend Linn from the Darbin Orvar channel. We made plans to drive down to Corvallis to meet with Linn and her husband Matt, and I decided to make this wooden box for them as a gift. I used some tropical hardwood for the sides (I think it was Ipe), and cherry wood for the top and bottom. The liner was Paduk.
I only had a few days to make it, so I worked up until the last minute. I did what I could to save time, and ran into trouble fighting the clock on glue dry time. I clamped for the minimum required time, in a somewhat cold shop, and then used my disk sander on it. The joint opened up a bit, and I quickly injected some glue and reclamped. I usually clamp for way longer than the recommended time, but was curious about how far you could push it. I learned a lesson, and probably won’t do that again.
Even though I didn’t have time to put a finish on it, the project came out great. I was proud to give it to Linn and Matt.
Visit DarbinOrvar channel here:
https://www.youtube.com/user/darbinorvar and her blog here:
https://www.youtube.com/user/DarbinNotes
Follow me on instagram:
https://www.instagram.com/scottbelleriwoodwork
Facebook:
https://www.facebook.com/ScottBelleriWoodWork
Re: YouTube Videos featuring Shopsmiths
Posted: Sun Feb 04, 2018 9:36 am
by rpd
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Feb 10, 2018 1:51 am
by rpd
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Feb 10, 2018 2:02 am
by rpd
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Feb 10, 2018 7:11 pm
by rpd
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Feb 10, 2018 7:49 pm
by jsburger
His Power Pro sure sounded noisy. The actual cutting sound did also so maybe it is just the way the audio was recorded.
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Feb 10, 2018 7:50 pm
by skou
Sent this guy an invite.
Let's see if he joins.
steve
Re: YouTube Videos featuring Shopsmiths
Posted: Sat Feb 10, 2018 8:18 pm
by rpd
Re: YouTube Videos featuring Shopsmiths
Posted: Mon Feb 12, 2018 8:25 pm
by rpd