lower blade guard
Moderators: HopefulSSer, admin
-
- Bronze Member
- Posts: 1
- Joined: Fri Mar 11, 2011 12:41 pm
lower blade guard
[ATTACH]12189[/ATTACH]
[ATTACH]12190[/ATTACH]
[ATTACH]12191[/ATTACH]I've been woodworking 20 yrs and just inherited a Mark 5. The lower blade guard was not attached but was included with the machine. When I attach the lower guard and then try to mount the arbor and blade, the blace would be perfectly aligned with the outside of the lower guard. I have tried for over a week to see what is wrong. Guess its time to ask for some more experience help. It looks like it would fit if I took off the silver aluminum collar but I don't think that's the problem. If it helps any, the serial number is 12183 and the model is 505644.
Thanks,
Assembfurn
[ATTACH]12190[/ATTACH]
[ATTACH]12191[/ATTACH]I've been woodworking 20 yrs and just inherited a Mark 5. The lower blade guard was not attached but was included with the machine. When I attach the lower guard and then try to mount the arbor and blade, the blace would be perfectly aligned with the outside of the lower guard. I have tried for over a week to see what is wrong. Guess its time to ask for some more experience help. It looks like it would fit if I took off the silver aluminum collar but I don't think that's the problem. If it helps any, the serial number is 12183 and the model is 505644.
Thanks,
Assembfurn
- Attachments
-
- 100_2346.jpg (140.22 KiB) Viewed 2427 times
-
- 100_2347.jpg (147.15 KiB) Viewed 2413 times
-
- 100_2348.jpg (136.22 KiB) Viewed 2423 times
-
- Platinum Member
- Posts: 1237
- Joined: Tue Jul 08, 2008 10:10 pm
=========================
Last edited by judaspre1982 on Wed May 10, 2017 4:44 pm, edited 1 time in total.
-
- Platinum Member
- Posts: 1237
- Joined: Tue Jul 08, 2008 10:10 pm
========================
Last edited by judaspre1982 on Wed May 10, 2017 4:44 pm, edited 1 time in total.
- dusty
- Platinum Member
- Posts: 21359
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Welcome to the family. It is always good to gain another new member. I apologize for not jumping in here to answer your questions but I do not have that model and can not. The images that you show seem to show a different lower blade guard than I have.assembfurn wrote:[ATTACH]12189[/ATTACH]
[ATTACH]12190[/ATTACH]
[ATTACH]12191[/ATTACH]I've been woodworking 20 yrs and just inherited a Mark 5. The lower blade guard was not attached but was included with the machine. When I attach the lower guard and then try to mount the arbor and blade, the blace would be perfectly aligned with the outside of the lower guard. I have tried for over a week to see what is wrong. Guess its time to ask for some more experience help. It looks like it would fit if I took off the silver aluminum collar but I don't think that's the problem. If it helps any, the serial number is 12183 and the model is 505644.
Thanks,
Assembfurn
I have attached a reference chart that details the production schedule for older model Mark V/5s.
Can you post an image of the name plate and serial number plate.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 34610
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
1) The arbor is the longer version intended to be used on a 505/510/520 model(larger tables etc.)
2) You have a 500(the carriage tells the tale) which requires a much shorter arbor. The blade is then actually inside the end of the quill shaft.
3) The important difference is that the blade is 3/8" closer to the quill end of the arbor on the shorter '500' version.
2) You have a 500(the carriage tells the tale) which requires a much shorter arbor. The blade is then actually inside the end of the quill shaft.
3) The important difference is that the blade is 3/8" closer to the quill end of the arbor on the shorter '500' version.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
JPG40504 wrote:1) The arbor is the longer version intended to be used on a 505/510/520 model(larger tables etc.)
2) You have a 500(the carriage tells the tale) which requires a much shorter arbor. The blade is then actually inside the end of the quill shaft.
3) The important difference is that the blade is 3/8" closer to the quill end of the arbor on the shorter '500' version.
See post two.
![Roll Eyes (Sarcastic) :rolleyes:](./images/smilies/rolleyes.gif)
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
- JPG
- Platinum Member
- Posts: 34610
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
beeg wrote:See post two.![]()
Hey! There IS a difference between 'I think' and 'is'.
![Wink ;)](./images/smilies/wink.gif)
The overall length(shorter) is not relevant to his problem. The quill end to blade spacing 'is'.
![Smile :)](./images/smilies/smile.gif)
Also a difference between 'I believe you have' and 'you have'.
He needs to know the arbor is not intended for use on his model. The saw guard is just one problem using that longer arbor will create.
![Smile :)](./images/smilies/smile.gif)
PAX Citizen!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
In Power Tool Woodworking for Everyone a spacer is described for using the metal lower saw guard on a model 500 with dado blades. This moves the end panel of the guard over by 1 1/4". I don't know if this is appropriate for the issue at hand, but one could check with Customer Service:
[ATTACH]12196[/ATTACH]
Guard Spacer (Mark V with Metal Lower Saw Guard Only)- Because the dado accessory can be used for extra-wide cuts, you must place a spacer (offered free through Customer Service) between the two halves of the lower saw guard. If you want to make a spacer, remove the cover from the guard and trace its contour on a piece of 1-1/4" stock that measures 3-1/2" wide by 10" long. Mark the location of the bolt holes and then draw another line parallel to the first one but about 1/4" smaller. Cut the stock on a bandsaw or scroll saw, and drill 9/32" holes for the attachment bolts. When you are finished, the spacer should look like the one shown in Figure 3-23. Secure the spacer between the two halves of the lower saw guard with 1/4"-20 x 1-3/4" bolts
[ATTACH]12196[/ATTACH]
Guard Spacer (Mark V with Metal Lower Saw Guard Only)- Because the dado accessory can be used for extra-wide cuts, you must place a spacer (offered free through Customer Service) between the two halves of the lower saw guard. If you want to make a spacer, remove the cover from the guard and trace its contour on a piece of 1-1/4" stock that measures 3-1/2" wide by 10" long. Mark the location of the bolt holes and then draw another line parallel to the first one but about 1/4" smaller. Cut the stock on a bandsaw or scroll saw, and drill 9/32" holes for the attachment bolts. When you are finished, the spacer should look like the one shown in Figure 3-23. Secure the spacer between the two halves of the lower saw guard with 1/4"-20 x 1-3/4" bolts
- Attachments
-
- F3-23LG.jpg (4.67 KiB) Viewed 2346 times
Art in Western Pennsylvania
- JPG
- Platinum Member
- Posts: 34610
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
At least he knows 'where'!;)SDSSmith wrote:This reminds me of something....[ATTACH]12198[/ATTACH]......and going and going.]
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange