Been looking all over the web and the Shopsmith web sites for a source for the 'machined washers' used on, for example, the 5/8" molder/dado arbor (SS PN 505506). There are supposed to be two of them but my arbor only has one.
The Shopsmith PN is 501451 but I can't find any source for them. Truly not a big deal (I have other arbors I use on a regular basis and this one is a spare) but I would like to make sure this arbor has all the parts that it is supposed to have. Any help appreciated.
Machined washers as used on 505506 arbor
Moderators: HopefulSSer, admin
-
bobgroh
- Gold Member
- Posts: 400
- Joined: Sun Jun 29, 2008 1:12 pm
- Location: Just east of Kansas City, Missouri
Machined washers as used on 505506 arbor
Bob Groh
Blue Springs, Missouri (just east of Kansas City, MO)
--------------------------------------------
1984 SS Mark V updated to model 510
1994 SS Mark V updated to model 520
SS SPT's: Bandsaw
Other tools:routers, Bosch router table, Craftsman 6" jointer, Steel City 12" bench planer, Porter Cable 7" power saw, and too much other stuff (not really - just kidding!!)
Blue Springs, Missouri (just east of Kansas City, MO)
--------------------------------------------
1984 SS Mark V updated to model 510
1994 SS Mark V updated to model 520
SS SPT's: Bandsaw
Other tools:routers, Bosch router table, Craftsman 6" jointer, Steel City 12" bench planer, Porter Cable 7" power saw, and too much other stuff (not really - just kidding!!)
Re: Machined washers as used on 505506 arbor
Have you tried Shopsmith for the washer? Of course, the shipping from them will be 2-3x the cost of the washer.bobgroh wrote:Been looking all over the web and the Shopsmith web sites for a source for the 'machined washers' used on, for example, the 5/8" molder/dado arbor (SS PN 505506). There are supposed to be two of them but my arbor only has one.
The Shopsmith PN is 501451 but I can't find any source for them. Truly not a big deal (I have other arbors I use on a regular basis and this one is a spare) but I would like to make sure this arbor has all the parts that it is supposed to have. Any help appreciated.
RF GuyMark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
-
chapmanruss
- Platinum Member
- Posts: 3501
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Machined washers as used on 505506 arbor
The machined washer is part number 501451 and if you type that into the search box when not on the Forum it will come up. They are $4.95 each now plus S & H. I have not found these from any other suppliers.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
bobgroh
- Gold Member
- Posts: 400
- Joined: Sun Jun 29, 2008 1:12 pm
- Location: Just east of Kansas City, Missouri
Re: Machined washers as used on 505506 arbor
Thanks for the replies. I did try searching the SS site but maybe fumble-fingered the number - tried again and there it is. Too expensive for me.
-
JPG
- Platinum Member
- Posts: 34650
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Machined washers as used on 505506 arbor
Is it about 3/16" thick?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
bobgroh
- Gold Member
- Posts: 400
- Joined: Sun Jun 29, 2008 1:12 pm
- Location: Just east of Kansas City, Missouri
Re: Machined washers as used on 505506 arbor
Sorry for the delay but both of my micrometers have gone missing. So here are the swag's: OD is 1-1/2", the ID is 5/8", the thickness of the rim is about 3/16", the rim itself is about 1/4" wide and the thickness from the ID to the inside edge of the rim is about 1/8" (i.e. 2/16"). Black anodize finish (or something like it).
-
JPG
- Platinum Member
- Posts: 34650
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Machined washers as used on 505506 arbor
PM me thy Snail Mail address and I will mail thee one. Used but serviceable.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange