Shopsmith Forums

Ciggy, Welcome to the Shopsmith Forum. Congratulations on the great find. As Ed has already said Tailstocks are all interchangeable. All Mark 5/V's be it a 500, 510/505, 520, 520S, Mark 7 or Mark 4 all use the same Tailstock which has been basically the same since the introduction of the Mark 5 in 1...

I can't tell you without going out to the shop, mounting my Universal Lathe Tool Rest on my Mark and getting actual measurements. For a little math work the main part to the equation is the center disk measuring 10" in diameter. That's how far apart the Headstock will be from the Tailstock. Sub...

gkillebrew, Welcome to the Shopsmith Forum. Below is a picture of a Lathe Tool Rest Assembly from a Mark V made in March 1982. This is from the original Table System later refered to as the Mark V 500. _ Lathe Tool Rest 03-82.jpg . They have the "threaded" Post and a shorter Arm than the o...

This is what that flat spring looks like in position as shown in the picture below. It is the part under the arrow not what the arrow is pointing to. Sorry it's the only picture I could find of it right now.

_

That is a lot of wear on that Gilmer Drive Sleeve Assembly. I don't know why the belt would wear it down so much through normal use even considering its age. If the Bearings are not turning smoothly, they should be replaced. Poorly turning bearings will rob power between the motor and Quill. You may...

At $50 off this is probably the best deal you will find on the Speed Reducer from Shopsmith.

danielsegge, Welcome to the Shopsmith Forum. As you may have guessed from the posts from other members it makes a difference which drive system your Shopsmith Mark 5 has. Mark 5 Greenies which started in 1954 through Goldies made prior to mid 1961 originally came with the Gilmer Drive while all Mark...

Thanks to all of you who have added their thoughts here so far. I would like to add to my opinion about the term "Smart Motor." Calling either the Conventional or Power Pro Headstock only "Smart Motor" tends to leave out the other functions and parts of either Headstock. The Quil...

Ed,

You are correct about it being locked down to the Way Tubes but for drilling the lock could be released and help keep it in line. I know, it's not ideal, just another possible use for the Speed Reducer.

Ed, It appears they have that If I am understand the catalog listing correctly. I found it at the link below from the online catalog. https://shopsmith.com/product/headstock-service-carton-and-packaging-step-by-step-packing-instructions-for-516645/ They do have a PDF, at the link below, on how to pa...