Shopsmith Forums

Thanks Ed. This band saw is on a Shopsmith stand. Bob

On February 8, 2020 I did a demo for The Buckeye Woodworkers and Woodturners on making Band Saw Boxes. Even though the Club has a decent 14"Delta I chose to take my own Shopsmith band saw. If interested take a look at the write-up in the Club's newsletter https://www.bwwt.us/uploads/7/0/5/0/705...

3 of spades and 8 of hearts is the Craftsman style of the Shopsmith "miter pro" 2 of hearts has two more pieces of the craftsman miter jig and a shaft cover for the unused side of the shopsmith belt sander drive shaft.

Slot one side, same as original bracket.

The "fix" is so simple that I am surprised that the gurus didn't catch it. Get a piece of 3/4" angle iron as long as the width of the table and using the bracket from under the table drill two properly spaced holes for the two bolts. Tighten them and voila the table will flatten right...

Welcome to the forum. If you post a picture of what you have the members will tell you what you will need. Many MarkV parts will indeed work/fit. Bob

A picture of the clip would help.

very nice

Peachtree and Woodcraft and probably others have workbench coasters where the workbench sits on the floor and you raise it to move. I got mine from Peachtree and like them. About $50.00

That is very cool! Have you turned anything on it yet? Where are the plans from? We started with an article from "Fine Woodworking" circa 1979. Saw a youtube vid of a guy demoing it at a Mid Maryland Woodturners Club meeting. He pointed out several flaws/problems. Our leader of the projec...