Shopsmith Forums

FYI I use Photo Gallery.

Ok how do I fix this? I took these with my camera rotated and they uploaded to my pictures just fine and in the normal view not sideways but when they load to the SS site they are rotated. I rotating it 90 degrees but it didn't change the outcome.

Great Job and Great Design!

1.jpg 2.jpg Clamp Kebabs. ;) :) 3.jpg I can lift out the entire racks which makes using these pretty fast. Well that's where I stopped today. I need to pick up some more skewers to finish the inside on the first side. Also the rest of my Rockler holders are setting in Spartanburg at the UPS termina...

1.jpg 2.jpg Time to hang the doors and start placing the clamp holders. 3.jpg I decided to add a plywood piece on the quick clamp hangers to be able to squeeze them down so they wont bang around when I open the doors. 4.jpg The idea to cut the parallel clamp holder into 3 sections worked pretty wel...

$matches[2] Next it was time to attach the bottom and top to the big H. $matches[2] $matches[2] $matches[2] This is where I discovered that the top of this rack would be a great place to store the totes for my drawer clips. P1120153 (1024x768).jpg I built a simple plywood track to hold them in place.

I used dominoes and pocket screws to attach the sides to the partition.



















And came up with this BIG H.

1.jpg I'm using raw edge plywood for this and a 3/16" radius bit to ease all the edges. 2.jpg Also using a cove bit to create a finger pull for the doors. 3.jpg 4.jpg And the casters finally arrived. The postal service lost the first order. :rolleyes: :rolleyes: 5.jpg And I decided to double u...

BuckeyeDennis wrote:Putting the drill centerline mark on the fence is a neat idea — that had never occurred to me. What are the two outboard marks for?

Those outer lines are at 3/4" for drilling my drawer box fronts for attaching the drawer faces.

Drilling the counter sunken holes for the carriage bolts.
This is where having several chucks comes in handy.





Once set up it is easier to change the chucks instead of changing the set up back and forth.