viewtopic.php?t=7946&start=30
Scroll down.
Press fit.
Search found 34654 matches
- Thu May 16, 2024 3:02 am
- Forum: Maintenance and Repair
- Topic: Scroll Saw Bushing puller - JPG inspired
- Replies: 5
- Views: 875
- Thu May 16, 2024 2:52 am
- Forum: Maintenance and Repair
- Topic: Emerson 1 1/8 hp start switch
- Replies: 3
- Views: 136
Re: Emerson 1 1/8 hp start switch
One can always add a manually operated external switch. Not recommended but it is a work around.
- Thu May 16, 2024 2:49 am
- Forum: Beginning Woodworking
- Topic: need help, what is thI s
- Replies: 8
- Views: 271
Re: need help, what is thI s
While we be on the subject of set screws, do be aware that cup tip and serrated cup screws are to be avoided. Flat or oval tip are the proper choice.
- Tue May 14, 2024 12:12 am
- Forum: Maintenance and Repair
- Topic: 10ER motor spins both ways
- Replies: 2
- Views: 106
Re: 10ER motor spins both ways
I be guessing here (this is a most unusual experience) 1) the motor has a natural tendency to start in one direction when the start circuit is ineffective.(a logical conclusion given the problem) 2) that natural tendency reverses occasionally due to factor(s) unknown. 3) by placing the motor in rota...
- Sun May 12, 2024 4:48 am
- Forum: Community
- Topic: Heads Up - Bargain 'available'
- Replies: 2402
- Views: 3739759
Re: Heads Up - Bargain 'available'
The "holes" in the tube rails are an early model distinction and applies to both the 505 and 510. The early version had tapped holes in the tables thus making them non adjustable.
- Sun May 12, 2024 4:20 am
- Forum: Beginning Woodworking
- Topic: need help, what is thI s
- Replies: 8
- Views: 271
Re: need help, what is thI s
An adapter sleeve works IF one includes a notch for the set screw to fully contact the bit shank. BTDT A bronze bushing bearing seems to have close enough dimensions.
- Tue May 07, 2024 2:55 pm
- Forum: Maintenance and Repair
- Topic: Wax tip.
- Replies: 17
- Views: 18731
Re: Wax tip.
What is needed is carnauba wax. As for scent, that comes from whatever solvents are used. A simpler replacement is paste finishing wax(minwax) JPW was a paste FLOOR wax. Original was slippery so later floor waxes were 'de slipperyiezed'. From looking at the ingredients I would not recommend Jubilee.
- Thu May 02, 2024 5:35 am
- Forum: Community
- Topic: I got a new to me mark
- Replies: 19
- Views: 2807
Re: I got a new to me mark
The black thing sticking out of the mortising attachment (8) is a mortising bit chisel.
- Thu May 02, 2024 5:23 am
- Forum: Maintenance and Repair
- Topic: Motor Re-Wire to reverse spin
- Replies: 1
- Views: 120
Re: Motor Re-Wire to reverse spin
The start circuit consists of the start winding in series with the start switch and start capacitor. The ends of that series circuit attaches to the run windings and power cord. Reversing the start circuit end connections will cause the motor to run in the opposite direction. However there appears t...
- Sun Apr 28, 2024 10:16 pm
- Forum: Maintenance and Repair
- Topic: 10ER Speed changer motor offset?
- Replies: 3
- Views: 333
Re: 10ER Speed changer motor offset?
I think a picture of what you have would help.