phone  (937) 890-5197

Upgrade To the Model 520 Pro Fence & Scale System

Save $57.57 - Order By Sunday October 15th at 11:59 PM EDT!

Engineered to Give You Even Better Control, Precision and Quality Performance

Mark V Model 510 to 520 Pro Fence System Upgrade

This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Model 505 or Model 510 Mark V. The professional-duty Pro Fence System features two inter-changeable stainless steel scales for direct-reading of rip cut widths. Plus, twin locking Levers, one for the infeed end of the fence and another for the outfeed end, to ensure a positive, precise fence lock-down, even when working with large and / or heavy workpieces. It drops straight down onto the fence rails without tipping or fiddling, then slides along the rails on high-tech glides.

Plus, the fence is easier to square-up than a 505 or 510 fence (the alignment screw is more easily accessible on the front edge of the fence base) and the 520 floating tables feature a 3-point locking system to ensure that your fence is always parallel to the blade, unlike the single-point locking system on the Model 510 floating tables.

Pro Fence System gives you even better precision and control Two inter-changeable stainless steel direct-reading scales

Here's What's Included:

Mark V Model 510 to 520 Pro Fence System Upgrade
  • Larger Rip Fence is 24-1/2" long x 2-1/2" thick with dual t-slot tracks on the top surface and a t-slot track on each face for mounting accessories such as: Rip fence mounted feather board, T-track utility light kit, Flip-up rip fence stop,
  • Direct-Reading Rip Fence Scales let you set rip cut dimensions in an instant without measurement. Includes two magnetic, stainless steel scales, one 45" long with a zero-point 6-1/2" from the left end and 38-1/2" from the right end - and a second scale 16" long with a zero-point 6-1/2" from the left end and 9-1/2" from the right end.
  • Wider Fence Straddler
  • (6) New Extruded Rails for main and extension tables
  • All required fittings and hardware
  • Instruction Manual fully describing alignment, maintenance, safety, tips and techniques.
  • Special Set-Up and Alignment Gauge

555982 Mark V Model 510 to Model 520 Pro Fence Upgrade
(for Mark V's manufactured in 1986 or later) ...   $575.69

555983 Mark V Model 510 to Model 520 Pro Fence Upgrade
(for Mark V's manufactured prior to 1986) ...   $575.69

Mark V Model 505 to Model 520 Pro Fence System Upgrade

The Pro Fence System Upgrade gives you everything you need to step your Anniversary Model 505 Mark V up to the super-versatile workpiece support system and enhanced rip fence of the Model 520 Pro Fence System models.

You'll get the professional-duty Pro Fence with direct-reading scales, two floating extension tables, plus connector tubes and telescoping legs to tie it all together into a System that will deliver optimum workpiece support.

Here's What's Included:

Mark V Model 505 to 520 Pro Fence System Upgrade
  • Larger Rip Fence is 24-1/2" long x 2-1/2" thick with dual t-slot tracks on the top surface and a t-slot track on each face
  • (2) Direct-Reading Rip Fence Scales You get two magnetic, stainless steel scales, one 45" long and one 16" long
  • Wider Fence Straddler
  • (6) New Rails for main and extension tables
  • Two Floating Extension Tables slide on connecting tubes and lock anywhere you want them
  • Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs
  • Two Telescoping Legs give added support. A quick twist locks their height
  • All required fittings and hardware
  • Instruction Manual
  • (2) Special Set-Up and Alignment Gauges

555986 Mark V Model 505 to 520 Pro Fence System Upgrade ...   $791.67

Mark V Model 520 Rip Scale Upgrade

Direct Reading Rip Scale Upgrade

Install this Rip Scale Upgrade Kit and in about a half-hour, you'll be instantly setting rip cut dimensions with lightning speed and matchless precision.

A powerful magnetic strip attached to the top of each rail holds your choice of a short or long precision stainless steel scale that's graduated in both, 32nds and 16ths. Choose the long scale when making cuts from 6-1/2" to the left of the blade to 38-1/2" to the right* - or the short scale when making cuts form 6-1/2" to the left of the blade to 9-1/2" to the right.

Zeroing-adjustments are easily made by simply re-positioning the steel scales on their magnetic holders. Once positioned, they will remain where you put them without shifting.

Includes: a new 17-1/2" Front Rail for your main table • (3) 7-1/2" Front Rails for your extension tables • 16" Long Steel Scale • 45" Long Steel Scale • Wide, Easy-to-read Scale Indicator • plus Complete Instructions and all required installation hardware.

Note: For use with Model 520 Pro Fence System Mark V's only.

* Scales will also read in opposite direction, except numbers will be upside-down.

522292 Rip Scale Upgrade Kit (for Mark V Model 520 only) ...   $199.87

Order on the Web or by Phone, if you prefer -- 1-937-890-5197.

Call before 4:30 PM Eastern Time

Give your Shopsmith representative the code 7DV097 when calling.

This Offer Ends 11:59 PM EDT Sunday October 15th

Products

Welcome to Shopsmith. Please fill in this form and we'll send you more information about the Shopsmith MARK 7 and other woodworking topics.

First Name: Last Name:
Address:
Optional Extra Address Line:

City: ST: Zip:


Email:
Re-Enter Email Address:
Phone: ( ) -

NO - I do not yet own a MARK 7 or Mark V
YES - I own a MARK 7 or Mark V

Submit