phone  (937) 890-5197

Shopsmith Mortise and Tenon Package

Save $57.99 - Order By Tuesday April 25th at 11:59 PM EDT

Perfectly Square Holes for Mortises of all Types and Cut Matching Tenons for them with these Hollow Chisel Mortise & Tenon Accessories

Shopsmith Mortising Jig For Perfectly Square Holes Heavy, Cast Aluminum Shopsmith Tenon Master Hold Workpieces Perpendicular To Your Table

The mortise-and-tenon is one of the strongest joints in woodworking. And, the recent popularity of arts-and-crafts (mission) furniture has also made it one of the most popular.

Tenons are usually 1/3 the thickness of the mating stock and centered. (3/4" stock = 1/4" tenon). The mortise should be about 3/4 the width of the mating stock. For blind joints, the tenon should be a bit shorter than the mortise depth, to allow room for glue. (4" wide stock = 1 7/16" long tenon).

Shopsmith Mortise and Tenon Package

If you've been putting off ordering the Mortising & Tenon Package now is the time to do it and take advantage of big savings! Save $57.99 on top of the already discounted regular package price of $289.93.

If you were to order both of these items separately it would cost you $312.63 as Shopsmith has already discounted the package price by $22.70 So you're really saving a whopping $80.69 by ordering the package now!

Package Includes: Mortising Attachment • Mortising Hold-Down • one each 1/4", 3/8" and 1/2" Bit/Chisel Set and • Honing Stone -- Plus -- Shopsmith Tenon-Master Jig!

Order the Complete Package for the Greatest Savings!

555845 Shopsmith Mortise and Tenon Package
(includes 555810 Mortising Package and 555479 Tenon Master Jig) ...   $289.93

Watch These Online Videos

Shopsmith Mortise Package

Shopsmith Mortising Jig For Perfectly Square Holes

The principle of this specialty tool is really quite simple. Just slip the mortising attachment over the outside of your Mark 7 or Mark V's quill and tighten it into position. Insert the mortising bit/chisel set into the attachment and tighten the bit into your drill chuck.

The attachment holds the chisel to keep it from rotating while your drill chuck holds and spins the mortising bit that rides inside the chisel.

As you lower the set into your wood, the bit removes most of the waste while the sharp chisel squares the edges of your hole. The hold-down keeps your workpiece from lifting off the table surface when you retract the chisel.

Includes: • Attachment • Hold-Down • 1/4", 3/8" and 1/2" Bit/Chisel Set and • Special Chisel Honing Stone.

Works with MARK 7 and Mark V models 500, 505, 510 and 520).

555810 Shopsmith Mortising Package ...   $182.94

Heavy, Cast Aluminum Shopsmith Tenon Master Hold Workpieces Perpendicular To Your Table

Shopsmith Tenon Master Jig

The Shopsmith Tenon Master Jig was designed with a wide, flat face that holds workpieces exactly perpendicular to your Mark 7 or Mark V worktable top. Although it is used primarily with the table saw for creating tenons on the ends of boards, it is equally useful for holding and guiding workpieces through all types of operations on other tools as well. For example, it can also be used to support and guide workpieces on your Shopsmith Belt Sander or Bandsaw.

Made of heavy, cast aluminum, it offers a large, comfortable knob for optimum control and a built-in miter bar that fits your Shopsmith MARK 7 or Mark V worktable, Belt Sander and Bandsaw.

A toggle clamp is included to help you grip the workpiece, as is an arced wooden trunnion that you can use to provide back-up support when working with stock that has angled ends... for example, when cutting spline grooves for the mating faces of miters, such as those on picture frames and similar projects.

This is a very versatile accessory with numerous work-saving and precision-enhancing applications.

Includes: • Tenon Master Jig, • Wooden Angle Trunnion • Adjustable, Quick-Release Toggle Clamp • Instructions and • Plans for a Table Saw Panel-Raising Fixture

555479 Shopsmith Tenon Master Jig ...   $129.69

Save On These Accessories

Telescoping Support Leg Adds Table Support To Resist Deflection

Table Support Leg

Special telescoping leg extends to 42-1/2" and features a notch in the top that slips under the table lip, then locks into position with a single knob. Keeps your worktable from deflecting when you may be exerting more downward pressure during mortising or drilling operations. Much faster than using standard Model 510 or 520 telescoping legs.

555627 Table Support Leg ...   $38.80

Replacement Mortising Bit / Chisel Sets

Replacement bit/chisel sets are available individually, if you already have a Shopsmith Mortising Attachment. Order them individually here at a nice savings.

521882 1/4" Mortising Bit / Chisel ...   $30.53

521883 3/8" Mortising Bit / Chisel ...   $32.69

521884 1/2" Mortising Bit / Chisel ...   $34.96

Mortising Chisel Honing Stones

Mortising chisels only work well when sharp... and sharpening them is a simple matter when you have these specially shaped stones. Sharpens all four sides of the chisels in a single action.

521902 Mortising Chisel Honing Stone
(for 1/4" 3/8" and 1/2" Chisels 50° -- post-1990 Mortisers) ...   $7.93

513549 Mortising Chisel Honing Stone
(for 1/4" and 3/8" Chisels 41° -- pre-1990 Mortisers) ...   $8.54

513550 Mortising Chisel Honing Stone
(for 1/2" Chisels 46.5° -- pre-1990 Mortisers) ...   $8.54

Order on the Web or by Phone, if you prefer -- 1-937-890-5197.

Call before 4:30 PM Eastern Time

Give your Shopsmith representative the code 7DV023 when calling.

This Offer Ends 11:59 PM EDT Tuesday April 25th

Products

Welcome to Shopsmith. Please fill in this form and we'll send you more information about the Shopsmith MARK 7 and other woodworking topics.

First Name: Last Name:
Address:
Optional Extra Address Line:

City: ST: Zip:


Email:
Re-Enter Email Address:
Phone: ( ) -

NO - I do not yet own a MARK 7 or Mark V
YES - I own a MARK 7 or Mark V

Submit