|
|||
|
|
Save Now Order before 11:59 PM Tuesday November 10,
2009
 |
Accessory Catalog Product Index |
| |
MARK V Upgrades |
| |
Special Purpose Tools |
| |
MARK V Accessories |
| |
Shop Accessories |
| |
Project Plans |
| |
New Products |
| |
Welcome Page |
| |
© 2009 Shopsmith All rights reserved. |
Six great items to help you get your shop organized
before you start tackling those Holiday projects
Mark V Table Storage System
before you start tackling those Holiday projects
Mark V Table Storage System
If
you like being organized and believe that "there should be a place for
everything and everything should be in its place", this new Table
Storage System is for you. Carefully engineered for strength and
convenience, the rugged, extruded aluminum Brackets will store your
MARK V Worktable, two Floating Tables, four Connector Tubes and a pair
of Telescoping Legs out of the way when not in use.Just mount the two Brackets to a piece of scrap stock (not included) - attach the assembled System to the wall at a height that's comfortable for you - and you're done.
The four Connector Tubes drop right into the open top of the upper Bracket Arms. Slide your Worktable onto the 45" long Mounting Tube (included) and hang it over the lower Bracket Arms. Then slide on your two floating Tables and Telescoping Legs.
The complete Kit includes two corrosion-resistant, black anodized Brackets, a 45" Mounting Tube, four Mounting Screws and full instructions.
| 555941 Mark V Table Storage System Regular: $40.79 Email Special: $32.63 (Save $8.16 - 20%) |
|
Magnetic Tool Bar
Made
of heavy gauge enameled steel, this is not your average tool bar!
Hammers, ratchets, open end wrenches, chisels, pliers . . . this bar
will hold them all without dropping. 24-inches x 13/16-inch x
1-1/8inches with two welded-on hanging brackets, spaced 16-inches on
centers to line up with wall studs. Screws included.| 942101 Magnetic Tool Bar Regular: $22.04 Email Special: $17.63 (Save $4.41 - 20%) |
|
Mark V Accessory Shelf
Special
Shelf holds frequently used MARK V attachments This sturdy 1" thick
wooden Shelf holds your Saw Guard, Rip Fence, Miter Gauge, Lathe
Tailstock, Blades, Lathe Tool Rest and other accessories for ALL MARK V
Models. May also be mounted to workbench, wall or cabinet. Cannot be
used under MARK V Cabinets.| 555953 Mark V Accessory Shelf Regular: $71.06 Email Special: $60.40 (Save $10.66 - 15%) |
|
Silica Gel Canister
Just
slip one of these slim, 2" x 4" x 1/2" steel canisters into your tool
chest or cabinet and forget about rust, mildew or corrosion damage.
Each is loaded with 40 grames of active silica gel…more than enough to
protect three cubic feet of enclosed space. The chemically inert gel
crystals won't stain and remain dry to the touch, even when saturated.
A special indicator window tells you when it's time to reactivate your
canister by simply baking it in a conventional oven. Can be reactivated
indefinitely. Lasts a lifetime. Buy them by the pair and save..| 521940 Silica Gel Canister (1) Regular: $13.49 Email Special: $8.09 (Save $5.40 - 40%) |
|
| 521941 Silica Gel Canister (2) Regular: $23.99 Email Special: $14.39 (Save $9.60 - 40%) |
|
Shopsmith Storage Station
Store
up to three of your Shopsmith Special Purpose Tools in an upright
position to protect your tool investment. Each Tool quickly slips into
and out of the holes in the aluminum Mounting Bases, just as they do in
your MARK V’s Headrest. The complete Kit includes the Stand, three
aluminum Mounting Bases and a set of Retractable Casters for mobility.* Stores up to 3 SPT Add-On Tools, saving shop space.
* Prevents accidental damage by storing tools in upright position
* Helps keep your shop neatly organized for greater efficiency
* Mobile casters lets you roll in and out of storage for easier shop clean-up.
Includes (3) Mounting Bases and Retractable Casters
| 555761 Shopsmith Storage Station Regular: $298.39 Email Special: $253.63 (Save $44.76 - 15%) |
|
Aluminum Mounting Base
So…what
do you do with your Shopsmith Special Purpose Tools or Extension Tables
when they’re not in use? Lean them against the wall in a corner of the
shop? Store one on each end of your MARK V? These may SEEM like OK
ideas…but, as you may have discovered, they’re not. Floor storage
increases the likelihood of damage to your valuable tools…and MARK V
storage only provides space for two tools…which are then usually in the
way…and have to be removed each time you perform practically any
operation.These value-priced Mounting Bases provide the ideal solution. Originally designed for mounting Tools to our Special Purpose Tool Power Stands, Shopsmith Customers quickly discovered that they could be attached to a simple 2” x 10” shelf, mounted to the wall with readily available metal shelf brackets. This way, they’re not consuming valuable floor space…or susceptible to damage.
Make your shelf as long as you like…or need…even stack two shelves above one another, if that works out better for you. .
| 505655 Aluminum Mounting Base Regular: $41.99 Email Special: $35.69 (Save $6.30 - 15%) |
|
