555970 Overarm Pin Router
 Just mount the Overarm and Router Table directly to your MARK V's twin Way Tubes and Worktable and in minutes, you'll be performing many operations faster and with far greater precision and repeatability than you could ever hope to achieve with conventional routing methods.
You'll do all this with your overarm Router:
*Form decorative edges and surface designs on straight or curved stock.
*Cut precision dadoes, rabbets, sliding dovetails, drop-leaves and similar joints.
*Repair furniture and veneers.
Joint workpiece edges for glue-ups.
*"Saw" straight and irregular shapes.
*"Drill" round or oddly-shaped holes.
*Pin rout exact duplicate workpieces.
And, since it operates with the bit cutting down from above the workpiece, you'll have a clear, safe view of your work at all tiems...and be able to make depth-of-cut adjustments with a simple drill press-like quill lever.
Here's what you'll get:
Overarm, Mounting Clamps, Worktable, (2) Table Inserts (one for conventional routing and one for pin routing), (3) Guide/Starter Pins, Two-piece Fence with Mounting Knobs, Safety Shield, Dust Port, Mounting Hardware and Manual.
Price $485.99
Status: Quantity is low.
|
