Cross-Cut Auxiliary Table PART #555526

Enjoy the Cutoff Convenience and Precision with Shopsmith’s Amazing Crosscut Sliding Table System and Auxillary Table

$64.95

-
+

-

(0 Customer Reviews)

Ingenious Sliding Table Makes Easy Work of Cross-Cutting Long or Cumbersome Workpieces

This ingenious sliding table acts like a “sled” to support long or wide workpieces as it carries them smoothly and precisely through otherwise difficult cross-cuts. With this accessory, precise crosscuts and miters on large pieces of stock are easy and accurate!

Its durable, laminated surface is a full 15-3/4-inches x 31-3/4-inches to provide plenty of support. The aluminum fence adjusts quickly for 90-degree, 45-degree, 36-degree, 30-degree and 22.5-degree angle cuts to make precise miters for four, five, six, or eight-sided projects.

LEARN MORE
  • (1) Auxillary Table: 1/2″ Thick x 6-7/8″ Wide x 23-7/8″ Long Plastic Laminate Covered MDF with a black plastic edge band around the four edges
LEARN MORE

The Can't Miss Details

Ingenious Sliding Table Makes Easy Work of Cross-Cutting Long or Cumbersome Workpieces

This ingenious sliding table acts like a “sled” to support long or wide workpieces as it carries them smoothly and precisely through otherwise difficult cross-cuts. With this accessory, precise crosscuts and miters on large pieces of stock are easy and accurate!

Its durable, laminated surface is a full 15-3/4-inches x 31-3/4-inches to provide plenty of support. The aluminum fence adjusts quickly for 90-degree, 45-degree, 36-degree, 30-degree and 22.5-degree angle cuts to make precise miters for four, five, six, or eight-sided projects.

Available in three versions for use with all MARK 7 / MARV V models, as well as other table saws.

Auxiliary Table Lets You Match Cross-Cut Table Height on the Opposite Side of Your Saw Blade to Support Separating Scrap from Your Workpiece

The miter bar on the bottom locks this auxiliary table into the table slot on the opposite side of the blade from the Cross-cut Sliding Table when it's in use. Its purpose is to match the height and thickness of the Cross-cut Sliding Table to keep scrap material from falling into your blade. Eliminates possible blade problems and dangerous kickbacks.

Note: For All MARK Models. Only made for Shopsmith machines.

Note: For use with Crosscut Sliding Table

Add Another Level of Accuracy with the Crosscut Sliding Table Sandpaper (516913)
Abrasive Strip keeps your work piece from slipping out of position as you cut. While using the Cross-Cut Sliding Table. 1-1/2" x 30" Adhesive-backed Aluminum Oxide Abrasive Strip.
Part NumberNameSpecifications
555526Cross-Cut Auxiliary Table(1) Auxillary Table: 1/2" Thick x 6-7/8" Wide x 23-7/8" Long Plastic Laminate Covered MDF with a black plastic edge band around the four edges

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. Normal item shipped via UPS Groud or USPS View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
Cross-Cut Auxiliary Table 555526

$64.95Add to cart