1/4 Inch Carbide Router Bit PART #521867

Shopsmith Carbide-Tipped Router Bits are Perfect for Working with Hardwoods, Softwoods and Laminates in Your Shop

$27.84

-
+

-

(0 Customer Reviews)

The Can't Miss Details

Shopsmith carbide-tipped router bits have been designed for working with hardwoods, laminates in a production or home shop environment. Each features rugged carbide tips to take and hold a keen cutting edge, with infrequent sharpening.

All have 1/2-inch shanks for use in the Shopsmith 1/2-inch router chuck (514631). A step up from our standard, high speed steel bits.
• 3/4" Straight Carbide-Tipped Router Bit (521870)
• 1/2" Straight Carbide-Tipped Router Bit (521869)
• 3/8" Straight Carbide-Tipped Router Bit (521868)
• 1/4" Straight Carbide-Tipped Router Bit (521867)
• 1/2" Dovetail Carbide-Tipped Router Bit (521866)

1/2” Shopsmith Router Chuck turns your MARK into a great overhead Router Table (514631)
This precision machined tool steel Router Chuck has been especially designed to slip onto your MARK V’s 5/8” Spindle and firmly grip any 1/2” shank Router Bit for over-table routing operations.

Made specifically to handle the side thrust associated with Routing. This Router Chuck features two setscrews to grip your Router Bit firmly and a third setscrew to grip your MARK V’s spindle.

CAUTION: Do NOT attempt to perform routing or similar side thrust operations with your 1/2” drill chuck, as this will damage your Chuck.

1/2" Router Chuck with Guard (555191)
Chuck withstands the side-thrust typically accompanying routing operations.
Precision-machined from fine tool steel for exceptional durability. Two Setscrews hold virtually any bit or attachment securely. Comes with Shield. 1/2" shank bits only! The Clear Shield protects hands and eyes. The brush knocks down the flying chips and dust to make dust collection more effective.

Shopsmith ¼” Router Chuck allows you to hold ¼ Inch Shank Bits Tightly and Securely (514632)
Holds ¼” Shank router Bits in a similar fashion as the ½” Router Chuck above PLUS -- Also lets you use Shopsmith's Drum Sanding Set on your Belt Sander's Auxiliary Shaft. Just slip this Router Chuck onto your Belt Sander's Auxiliary Shaft and you'll be ready to Drum Sand all types of projects with our 1/4" shaft Drum Sanding Set. A better choice than using your Drill Chuck, since most geared Chucks (including ours) are not designed to withstand side deflection pressure.

1/4” Router Chuck with Guard (555189)
Chuck withstands the side-thrust typically accompanying routing operations.
Precision-machined from fine tool steel for exceptional durability. Two Set-screws hold virtually any bit or attachment securely. Comes with Shield. 1/4" shank bits only! The Clear Shield protects hands and eyes. The brush knocks down the flying chips and dust to make dust collection more effective.

Create Beautiful Designs and Perfect Dovetail Joints and Rabbets with the Shopsmith Router Package (555176)
Create beautiful designs and perfect dovetail joints and rabbets with these router bits. Get exceptionally clean cuts with super-smooth edges so that all your work has that professional finish.

Package Includes: Router Chuck and Shield, 1/4", 3/8", 1/2", 3/4" Straight bits and 1/2" Dovetail Router Bits.

Router/Shaper Shield Puts Safety Back into Shaping and Routing (555373)
This see-through shield clamps around your Mark 7 or Mark V quill with a single setscrew and provides both front eye protection and a rear brush that can be adjusted to meet the top of the fence or your workpiece for added dust collection efficiency. Standard with router and shaper packages.

Note: Not for use with 10-ER, Mark 2 or older-style Mark VII.
Part NumberNameSpecifications
5218671/4 Inch Carbide Router Bit(1) 1/4 Inch Carbide Router Bit with 1/2 Inch Shank

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. Normal item shipped via UPS Groud or USPS View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
1/4 Inch Carbide Router Bit 521867

$27.84Add to cart