Airflow is the secret!
The DC3300 provides an efficient and effective way of collecting wood dust and shavings before they affect your equipment, clothes, shop and home. Collect woodworking shavings and filter fine dust from the air at the same time.The DC3300, with its exclusive airflow system, surpasses an ordinary suction-type shop vacuum with superior capacity for collection during sawing, sanding and planing operations. Hook up to three separate tools at the same time so you don't have to constantly relocate hoses.
The industrial-size blower moves large volumes of air. Dust slows down as air passes out the filter while the dust is trapped and falls into the collection bag. Gathered air is passed through the DC3300's permanent filter hood, practically dust-free flow return.
Special DC3300 advantages.
Use your DC3300 to sweep up leftover sawdust, chips and shavings after you've finished a project. Then, remove the hoses and run the DC3300 to remove any airborne dust and particles. Optional 4" Inlet Assembly lets you design a permanent piping system for your shop, eliminating the need to move your DC3300 from one machine to another. This unit can be used on any machine that accommodates a 2-1/2" hose. Complete instructions are included.
The DC3300 has an 8 amp, 1/2 hp industrial-duty capacitor start motor.
Power cord is 12' long.
The airflow is 330 CFM.
It weighs approximately 64 lbs.
The overall dimensions are 21" wide x 26" long x 48" high..
