|
Rout
and shape at 10,000 rpm with the Shopsmith Speed Increaser
| |
|
 |
| |
1.
3-Point Clamping (at quill, coupler and support bracket
assembly) provides for more accurate cutting results
and enhances stability.
2. Dual Spindle Guards for additional safety
3. Internal Mechanisms allow for 10,000 RPM
at Speed Increaser output Spindle
4. Cast Iron Housingprovides for quality,
durability, and dampens noise and vibration.
|
The
Shopsmith Speed Increaser boosts your MARK V's maximum
rpm to 10,000 for
super-smooth, super-fast routing and shaping
|
The Shopsmith
Speed Increaser will turn your MARK V into an even more efficient
routing and shaping tool than it already is . . . saving your
time and giving you smoother, cleaner cuts.
Designed for use with your Model 500, 510 or 520 MARK V, the
Speed Increaser is made to deliver 10,000 rpm (at a "V"
speed setting). As a result, you'll have to make fewer
passes with your stock…especially when cutting full profiles
. . . and spend a lot less time sanding, too.
The Increaser's under-table design also allows you to perform
table routing and shaping operations in a more conventional
fashion, with the bit cutting safely under your workpiece.
The special See-Through Speed Increaser Shield (included)
hooks to your DC-3300 Dust Collector or shop vacuum and does
an amazing job of capturing flying dust.
Includes: The Shopsmith Speed Increaser, Shield, 1/2-inch
Shaper Spindle with four sizes of (non-bearing) Rub Collars
(555463) and mounting hardware for the Increaser and the Shield.
555462
Shopsmith Speed Increaser
Price $280.88
Status: Quantity is low.
|
|
|
